24.11.2014, 05:46 UhrDeutsch | English
Hallo Gast [ Registrierung | Anmelden ]

Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
Autor Nachricht
jbs1136
Titel: dvd-rw  BeitragVerfasst am: 25.10.2006, 18:29 Uhr



Anmeldung: 15. Jul 2006
Beiträge: 136
Wohnort: Spanaway, Wa
I removed my cd-rw from this computer and put in a dvd-rw that is also of course a cd-rw. I deleted the mount point for the old cd and remove it's entry in the fstab. I rebooted expecting the new hardware to be found. It wasn't added to the fstab as I expected (remember I am new to Linux so do some things that might not make sense sometimes). When I checked using dmesg this is what I get (stuff not relevant removed to make it shorter / dvd is a read/write model that works under windows xp. it is a Micro Advantage drive).

Code:
hda: SAMSUNG SP0842N, ATA DISK drive
hdb: 16X8 DVD DUAL, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
libata version 2.00 loaded.
sata_uli 0000:00:0e.1: version 1.0
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFD02 bmdma 0xFA00 irq 11
ata2: SATA max UDMA/133 cmd 0xFC00 ctl 0xFB02 bmdma 0xFA08 irq 11
scsi0 : sata_uli
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_uli
ata2: SATA link down (SStatus 0 SControl 300)
  Vendor: ATA       Model: SAMSUNG SP2504C   Rev: VT10
  Type:   Direct-Access                      ANSI SCSI revision: 05
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0

cdrom: This disc doesn't have any tracks I recognize!
hdb: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
ATAPI device hdb:
  Error: Medium error -- (Sense key=0x03)
  (reserved error code) -- (asc=0x57, ascq=0x00)
  The failed "Read 10" packet command was:
  "28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdb, sector 64
isofs_fill_super: bread failed, dev=hdb, iso_blknum=16, block=16
hdb: DMA timeout retry
hdb: timeout waiting for DMA
hdb: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdb: drive not ready for command
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: ATAPI reset complete
hdb: DMA timeout retry
hdb: timeout waiting for DMA
hdb: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdb: drive not ready for command
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: ATAPI reset complete
hdb: DMA timeout retry
hdb: timeout waiting for DMA
hdb: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdb: drive not ready for command
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: ATAPI reset complete
hdb: DMA timeout retry
hdb: timeout waiting for DMA
hdb: status error: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdb: drive not ready for command
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: status error: status=0x50 { DriveReady SeekComplete }
ide: failed opcode was: unknown
hdb: ATAPI reset complete


I had a blank dvd +r in the drive when I did this.

Any help appreciated. Trying to get away the horrible dvd burning in windows.

john
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
h2
Titel: RE: dvd-rw  BeitragVerfasst am: 25.10.2006, 19:01 Uhr



Anmeldung: 12. Mar 2005
Beiträge: 1005

You are probably mounting it wrong.

/dev/hdb /media/cdrom0 udf,iso9660 user,noauto 0 0

is the correct syntax assuming you have only one dvd / cd device

My guess is that you didn't include the noauto item.

By the way, if you're running this on the same ide channel as your main harddrive, which I assume is /dev/hda, give some thought to not doing that, ide can get annoyed when devices of two different speeds are on the same channel. I've had hard drives fail in that configuration before so I don't use it anymore. Hard drives on one channel, optical/cd/dvd drives on their own. If that's an option for you I recommend you do it.

Also, dvd units require the full 80 strand ide cable to function correctly at full speed, not the old standard 40 strand one that they used to use for cd units.

_________________
Read more on dist-upgrades using du-fixes-h2.sh script.
New: rdiff-backup script
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
jbs1136
Titel: RE: dvd-rw  BeitragVerfasst am: 27.10.2006, 15:52 Uhr



Anmeldung: 15. Jul 2006
Beiträge: 136
Wohnort: Spanaway, Wa
h2,

Thanks for responding and my apologies for taking so long in getting back. I read you suggestions but didn't want to post until I tried them. I only have the one dvd-rw installed. The original entry in fstab was correct and I didn't forget the noauto. My biggest concern was why it was being shown as a dvd-rom and not dvd-rw. Anyway, after reading your post I tried removing all traces of the hardware, disconnected it and powered up. Checked that fstab didn't have it and nothing was in media as a mount point. shut down, reconnected, found no entry in fstab (to see if it would find it) and cut and pasted your entry. created a mount point but still wouldn't work. shut down, swapped cables so that each was on their own per your suggestion. When I did this I think I discovered the problem. Where the cable connects to the dvd, one of the pins on the dvd was pushed about 1/2 way in. That can't be good. I carefully pulled it back out and proceeded to hook it up. restarted, had to correct fstab to reflect hdd instead of hdb. still nothing. I removed the drive and installed it on my windows computer. Under linux and windows both I get the same results, it works for cd's but that is it. I put in a movie from blockbuster and it wasn't recognized by windows. same with a dvd-r and dvd-rw. I guess that pin really screwed it up. First time that has happened to me.

Anyway, thanks for your help and just wanted to let you know what happened. Now I have 2 cd-rw's Smilie and no dvd-rw but Christmas is coming and the ones with light scribe tech is coming down in price.

Thanks,

john
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
mzilikazi
Titel: Re: RE: dvd-rw  BeitragVerfasst am: 27.10.2006, 16:40 Uhr
Team Member
Team Member


Anmeldung: 17. Dez 2003
Beiträge: 1109
Wohnort: Ganymede
jbs1136 hat folgendes geschrieben::

Anyway, thanks for your help and just wanted to let you know what happened. Now I have 2 cd-rw's Smilie and no dvd-rw but Christmas is coming and the ones with light scribe tech is coming down in price.

Thanks,

john


AFAIK LightScribe does not work under Linux unless you get a LaCie drive.
I posted about it here.
It would be interesting to see their software and try it on other LightScribe drives.

_________________
Ubuntu - An ancient African word for "Can't install Debian"
 
 Benutzer-Profile anzeigen Private Nachricht senden E-Mail senden Website dieses Benutzers besuchen  
Antworten mit Zitat Nach oben
jbs1136
Titel: RE: Re: RE: dvd-rw  BeitragVerfasst am: 27.10.2006, 22:39 Uhr



Anmeldung: 15. Jul 2006
Beiträge: 136
Wohnort: Spanaway, Wa
mzilikazi,

Thanks for that info. I have one on order from frys.com. Hope to have it Monday (2 day shipment - ordered this morning). I had planned to pop it in the linux computer and see if it got detected and see what happened. Thanks to the link about your previous post. I have that thread bookmarked and will download all of the stuff this weekend. When I get it in and try it out I will post back to that forum or should I start a new thread? The one I ordered says of course windows os but that is almost always the case isn't it?

Here is the link to the product description.

http://shop3.outpost.com/%7BWL0IUldsyM1 ... IN_RSLT_PG

I almost bought the samsung, I have a tv, dvd player, and a couple of hard drives from them but there was something about the hp that I liked better. The rebate helped wasn't the deciding factor. I think it was the speeds or formats. I took a long look before ordering.

Anyway, thanks for the link and I will give a post back when something happens.

John
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Beiträge vom vorherigen Thema anzeigen:     
Gehe zu:  
Alle Zeiten sind GMT + 1 Stunde
Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
PNphpBB2 © 2003-2007 
 
Deutsch | English
Logos and trademarks are the property of their respective owners, comments are property of their posters, the rest is © 2004 - 2006 by Jörg Schirottke (Kano).
Consult Impressum and Legal Terms for details. Kanotix is Free Software released under the GNU/GPL license.
This CMS is powered by PostNuke, all themes used at this site are released under the GNU/GPL license. designed and hosted by w3you. Our web server is running on Kanotix64-2006.