21.04.2014, 08:59 UhrDeutsch | English
Hallo Gast [ Registrierung | Anmelden ]

Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
Autor Nachricht
Kano
Titel:   BeitragVerfasst am: 24.06.2010, 18:54 Uhr



Anmeldung: 17. Dez 2003
Beiträge: 16176

Kapierst dus heute noch? Es bringt gar nix, wenn du ein modul lädst wo nicht benützt wird. In der /etc/modules schreibt man ausschliesslich (!) module rein, die keine ids haben, z.b. wennst die mit Hilfe von sensors-detect gefunden hast. Ansonsten machst nur das debugging umständlicher, weil laden lässt sich so gut wie jedes modul, nur obs das richtige ist merkts auch erst wenn die Hardware da ist. Es ist zwar im Speicher tut aber nix. Das könntest sogar du checken, lsmod|grep name, aber es führt zu gar nix! Beispiel:

Dieses modul NICHT reinschreiben:

/sbin/modinfo -F alias rt2870sta

Das hingegen kann rein:

/sbin/modinfo -F alias coretemp
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Felis
Titel:   BeitragVerfasst am: 24.06.2010, 19:51 Uhr



Anmeldung: 18. Okt 2007
Beiträge: 393

Gut, aber ich hatte es ihm ja nur für den - unwahrscheinlichen - Fall geraten reinzuschreiben, falls das Modul nach Reboot nicht geladen sein sollte. Unterm Motto "nix ist unmöglich". Winken
Aber warum wird sein Stick nicht erkannt?
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Kano
Titel:   BeitragVerfasst am: 24.06.2010, 20:08 Uhr



Anmeldung: 17. Dez 2003
Beiträge: 16176

/sbin/modinfo -F alias rt3572sta

wirds dir sagen und

dmesg
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
hawidiere
Titel:   BeitragVerfasst am: 24.06.2010, 20:33 Uhr



Anmeldung: 22. Jun 2010
Beiträge: 14

Bitte hier die Ausgaben.

/sbin/modinfo -F alias rt3572sta :

Code:
/sbin/modinfo -F alias rt3572sta
usb:v167Bp4001d*dc*dsc*dp*ic*isc*ip*
usb:v5A57p0284d*dc*dsc*dp*ic*isc*ip*
usb:v1690p0744d*dc*dsc*dp*ic*isc*ip*
usb:v1690p0740d*dc*dsc*dp*ic*isc*ip*
usb:v04BBp0944d*dc*dsc*dp*ic*isc*ip*
usb:v0DF6p0042d*dc*dsc*dp*ic*isc*ip*
usb:v0DF6p0041d*dc*dsc*dp*ic*isc*ip*
usb:v1740p9801d*dc*dsc*dp*ic*isc*ip*
usb:v148Fp3572d*dc*dsc*dp*ic*isc*ip*
usb:v0DB0p6899d*dc*dsc*dp*ic*isc*ip*
usb:v100Dp9031d*dc*dsc*dp*ic*isc*ip*
usb:v050Dp815Cd*dc*dsc*dp*ic*isc*ip*
usb:v0411p00E8d*dc*dsc*dp*ic*isc*ip*
usb:v1737p0071d*dc*dsc*dp*ic*isc*ip*
usb:v1737p0070d*dc*dsc*dp*ic*isc*ip*
usb:v7392p7717d*dc*dsc*dp*ic*isc*ip*
usb:v7392p7718d*dc*dsc*dp*ic*isc*ip*
usb:v5A57p0282d*dc*dsc*dp*ic*isc*ip*
usb:v5A57p0280d*dc*dsc*dp*ic*isc*ip*
usb:v1690p0740d*dc*dsc*dp*ic*isc*ip*
usb:v04E8p2018d*dc*dsc*dp*ic*isc*ip*
usb:v14B2p3C09d*dc*dsc*dp*ic*isc*ip*
usb:v1482p3C09d*dc*dsc*dp*ic*isc*ip*
usb:v050Dp815Cd*dc*dsc*dp*ic*isc*ip*
usb:v050Dp805Cd*dc*dsc*dp*ic*isc*ip*
usb:v157Ep300Ed*dc*dsc*dp*ic*isc*ip*
usb:v129Bp1828d*dc*dsc*dp*ic*isc*ip*
usb:v0E66p0003d*dc*dsc*dp*ic*isc*ip*
usb:v0E66p0001d*dc*dsc*dp*ic*isc*ip*
usb:v15C5p0008d*dc*dsc*dp*ic*isc*ip*
usb:v083Ap6618d*dc*dsc*dp*ic*isc*ip*
usb:v13D3p3247d*dc*dsc*dp*ic*isc*ip*
usb:v14B2p3C25d*dc*dsc*dp*ic*isc*ip*
usb:v0471p200Fd*dc*dsc*dp*ic*isc*ip*
usb:v1740p9702d*dc*dsc*dp*ic*isc*ip*
usb:v1740p9701d*dc*dsc*dp*ic*isc*ip*
usb:v0CDEp0025d*dc*dsc*dp*ic*isc*ip*
usb:v0586p3416d*dc*dsc*dp*ic*isc*ip*
usb:v0CDEp0022d*dc*dsc*dp*ic*isc*ip*
usb:v083Ap7522d*dc*dsc*dp*ic*isc*ip*
usb:v083Ap8522d*dc*dsc*dp*ic*isc*ip*
usb:v083ApA618d*dc*dsc*dp*ic*isc*ip*
usb:v083ApB522d*dc*dsc*dp*ic*isc*ip*
usb:v15A9p0006d*dc*dsc*dp*ic*isc*ip*
usb:v1044p800Bd*dc*dsc*dp*ic*isc*ip*
usb:v07AAp003Fd*dc*dsc*dp*ic*isc*ip*
usb:v07AAp003Cd*dc*dsc*dp*ic*isc*ip*
usb:v07AAp002Fd*dc*dsc*dp*ic*isc*ip*
usb:v14B2p3C27d*dc*dsc*dp*ic*isc*ip*
usb:v14B2p3C23d*dc*dsc*dp*ic*isc*ip*
usb:v050Dp8053d*dc*dsc*dp*ic*isc*ip*
usb:v14B2p3C07d*dc*dsc*dp*ic*isc*ip*
usb:v07D1p3C11d*dc*dsc*dp*ic*isc*ip*
usb:v07D1p3C09d*dc*dsc*dp*ic*isc*ip*
usb:v2019pED06d*dc*dsc*dp*ic*isc*ip*
usb:v14B2p3C28d*dc*dsc*dp*ic*isc*ip*
usb:v14B2p3C06d*dc*dsc*dp*ic*isc*ip*
usb:v0DF6p002Dd*dc*dsc*dp*ic*isc*ip*
usb:v0DF6p002Cd*dc*dsc*dp*ic*isc*ip*
usb:v0DF6p002Bd*dc*dsc*dp*ic*isc*ip*
usb:v0DF6p0017d*dc*dsc*dp*ic*isc*ip*
usb:v0B05p1742d*dc*dsc*dp*ic*isc*ip*
usb:v0B05p1732d*dc*dsc*dp*ic*isc*ip*
usb:v0B05p1731d*dc*dsc*dp*ic*isc*ip*
usb:v177Fp0302d*dc*dsc*dp*ic*isc*ip*
usb:v0789p0164d*dc*dsc*dp*ic*isc*ip*
usb:v0789p0163d*dc*dsc*dp*ic*isc*ip*
usb:v0789p0162d*dc*dsc*dp*ic*isc*ip*
usb:v083Ap7512d*dc*dsc*dp*ic*isc*ip*
usb:v0DF6p003Fd*dc*dsc*dp*ic*isc*ip*
usb:v0DF6p0039d*dc*dsc*dp*ic*isc*ip*
usb:v07B8p2770d*dc*dsc*dp*ic*isc*ip*
usb:v07B8p2870d*dc*dsc*dp*ic*isc*ip*
usb:v148Fp2870d*dc*dsc*dp*ic*isc*ip*
usb:v148Fp2770d*dc*dsc*dp*ic*isc*ip*


dmesg:
Code:
dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.32-21-generic (root@Kanotix) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #33 SMP Tue Apr 20 23:50:36 CEST 2010 (Ubuntu 2.6.32-21.33-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002eff0000 (usable)
[    0.000000]  BIOS-e820: 000000002eff0000 - 000000002effffc0 (ACPI data)
[    0.000000]  BIOS-e820: 000000002effffc0 - 000000002f000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x2eff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF ?
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF ?
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF ?
[    0.000000]   F0000-FFFFF ?
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 020000000 mask FF8000000 write-back
[    0.000000]   2 base 028000000 mask FFC000000 write-back
[    0.000000]   3 base 02C000000 mask FFE000000 write-back
[    0.000000]   4 base 02E000000 mask FFF000000 write-back
[    0.000000]   5 base 0A0000000 mask FFC000000 write-combining
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000002eff0000 (usable)
[    0.000000]  modified: 000000002eff0000 - 000000002effffc0 (ACPI data)
[    0.000000]  modified: 000000002effffc0 - 000000002f000000 (ACPI NVS)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-000000002eff0000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 002ec00000 page 2M
[    0.000000]  002ec00000 - 002eff0000 page 4k
[    0.000000] kernel direct mapping tables up to 2eff0000 @ 7000-c000
[    0.000000] RAMDISK: 22c95000 - 2343390e
[    0.000000] ACPI: RSDP 000e5010 00014 (v00 OID_00)
[    0.000000] ACPI: RSDT 2efffbc0 00030 (v01 INSYDE RSDT_000 00000001 _CSI 00010100)
[    0.000000] ACPI: FACP 2efffac0 00074 (v01 INSYDE FACP_000 00000100 _CSI 00010100)
[    0.000000] ACPI: DSDT 2effc260 03859 (v01 Mitac_ Winni___ 00001000 INTL 02002025)
[    0.000000] ACPI: FACS 2effffc0 00040
[    0.000000] ACPI: BOOT 2efffb50 00028 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010100)
[    0.000000] ACPI: DBGP 2efffb80 00034 (v01 INSYDE DBGP_000 00000100 _CSI 00010100)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 751MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 2eff0000
[    0.000000]   low ram: 0 - 2eff0000
[    0.000000]   node 0 low ram: 00000000 - 2eff0000
[    0.000000]   node 0 bootmap 00008000 - 0000de00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 002eff0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008f7a18]    TEXT DATA BSS ==> [0000100000 - 00008f7a18]
[    0.000000]   #4 [0022c95000 - 002343390e]          RAMDISK ==> [0022c95000 - 002343390e]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00008f8000 - 00008fb134]              BRK ==> [00008f8000 - 00008fb134]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000e000]          BOOTMAP ==> [0000008000 - 000000e000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0002eff0
[    0.000000]   HighMem  0x0002eff0 -> 0x0002eff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0002eff0
[    0.000000] On node 0 totalpages: 192395
[    0.000000] free_area_init_node: node 0, pgdat c07ae060, node_mem_map c1001000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1472 pages used for memmap
[    0.000000]   Normal zone: 186928 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 2f000000 (gap: 2f000000:d0f80000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34776 r0 d22568 u4194304
[    0.000000] pcpu-alloc: s34776 r0 d22568 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190891
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=c8dca041-f343-4bee-aa97-7c88631415de ro quiet vga=791 splash quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 3849920 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 742620k/769984k available (4752k kernel code, 26656k reserved, 2129k data, 680k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xef7f0000 - 0xff7fe000   ( 256 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xeeff0000   ( 751 MB)
[    0.000000]       .init : 0xc07b9000 - 0xc0863000   ( 680 kB)
[    0.000000]       .data : 0xc05a412f - 0xc07b87e8   (2129 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05a412f   (4752 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:336
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1990.169 MHz processor.
[    0.002009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3980.33 BogoMIPS (lpj=1990169)
[    0.002058] Security Framework initialized
[    0.002096] AppArmor: AppArmor initialized
[    0.002107] Mount-cache hash table entries: 512
[    0.003235] Initializing cgroup subsys ns
[    0.003242] Initializing cgroup subsys memory
[    0.003254] Initializing cgroup subsys devices
[    0.003258] Initializing cgroup subsys freezer
[    0.003262] Initializing cgroup subsys net_cls
[    0.003292] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.003296] CPU: L2 Cache: 512K (64 bytes/line)
[    0.003302] mce: CPU supports 4 MCE banks
[    0.003329] Performance Events: AMD PMU driver.
[    0.003341] ... version:                0
[    0.003343] ... bit width:              48
[    0.003346] ... generic registers:      4
[    0.003348] ... value mask:             0000ffffffffffff
[    0.003351] ... max period:             00007fffffffffff
[    0.003353] ... fixed-purpose events:   0
[    0.003356] ... event mask:             000000000000000f
[    0.003363] Checking 'hlt' instruction... OK.
[    0.007726] SMP alternatives: switching to UP code
[    0.015350] Freeing SMP alternatives: 19k freed
[    0.015403] ACPI: Core revision 20090903
[    0.023737] ACPI: setting ELCR to 0200 (from 0c20)
[    0.024011] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.024030] ftrace: allocating 21569 entries in 43 pages
[    0.026231] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.026242] weird, boot CPU (#0) not listed by the BIOS.
[    0.026244] SMP motherboard not detected.
[    0.026250] Local APIC not detected. Using dummy APIC emulation.
[    0.026252] SMP disabled
[    0.027403] Brought up 1 CPUs
[    0.027407] Total of 1 processors activated (3980.33 BogoMIPS).
[    0.028040] CPU0 attaching NULL sched-domain.
[    0.028347] devtmpfs: initialized
[    0.029366] regulator: core version 0.5
[    0.029400] Time: 20:16:08  Date: 06/24/10
[    0.029489] NET: Registered protocol family 16
[    0.029683] EISA bus registered
[    0.029697] ACPI: bus type pci registered
[    0.029858] PCI: PCI BIOS revision 2.10 entry at 0xe8b24, last bus=1
[    0.029861] PCI: Using configuration type 1 for base access
[    0.029886] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.029888] mtrr: probably your BIOS does not setup all CPUs.
[    0.029890] mtrr: corrected configuration.
[    0.031103] bio: create slab <bio-0> at 0
[    0.031655] ACPI: EC: Look up EC in DSDT
[    0.039736] ACPI: Interpreter enabled
[    0.039753] ACPI: (supports S0 S3 S4 S5)
[    0.039791] ACPI: Using PIC for interrupt routing
[    0.043132] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[    0.043323] ACPI: No dock devices found.
[    0.043529] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.043594] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xa0000000-0xa3ffffff]
[    0.043691] pci 0000:00:01.0: supports D1
[    0.043731] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.043749] pci 0000:00:09.0: supports D1 D2
[    0.043753] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.043758] pci 0000:00:09.0: PME# disabled
[    0.043822] pci 0000:00:10.0: reg 20 io port: [0x1200-0x121f]
[    0.043847] pci 0000:00:10.0: supports D1 D2
[    0.043850] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.043854] pci 0000:00:10.0: PME# disabled
[    0.043901] pci 0000:00:10.1: reg 20 io port: [0x1300-0x131f]
[    0.043926] pci 0000:00:10.1: supports D1 D2
[    0.043928] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.043933] pci 0000:00:10.1: PME# disabled
[    0.043969] pci 0000:00:10.3: reg 10 32bit mmio: [0xf0000000-0xf00000ff]
[    0.044019] pci 0000:00:10.3: supports D1 D2
[    0.044023] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.044027] pci 0000:00:10.3: PME# disabled
[    0.044094] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.044103] pci 0000:00:11.0: quirk: region 1000-107f claimed by vt8235 PM
[    0.044108] pci 0000:00:11.0: quirk: region 1400-140f claimed by vt8235 SMB
[    0.044171] pci 0000:00:11.1: reg 20 io port: [0x1100-0x110f]
[    0.044233] pci 0000:00:11.5: reg 10 io port: [0xe100-0xe1ff]
[    0.044275] pci 0000:00:11.5: supports D1 D2
[    0.044309] pci 0000:00:11.6: reg 10 io port: [0xe200-0xe2ff]
[    0.044350] pci 0000:00:11.6: supports D1 D2
[    0.044384] pci 0000:00:12.0: reg 10 io port: [0xe300-0xe3ff]
[    0.044391] pci 0000:00:12.0: reg 14 32bit mmio: [0xf0000100-0xf00001ff]
[    0.044428] pci 0000:00:12.0: supports D1 D2
[    0.044431] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.044436] pci 0000:00:12.0: PME# disabled
[    0.044492] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe007ffff]
[    0.044499] pci 0000:01:00.0: reg 14 32bit mmio pref: [0x90000000-0x97ffffff]
[    0.044518] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x0c0000-0x0cffff]
[    0.044536] pci 0000:01:00.0: supports D1 D2
[    0.044571] pci 0000:00:01.0: bridge io port: [0xc000-0xdfff]
[    0.044576] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xefffffff]
[    0.044582] pci 0000:00:01.0: bridge 32bit mmio pref: [0x90000000-0x9fffffff]
[    0.044607] pci_bus 0000:00: on NUMA node 0
[    0.044614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.049459] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
[    0.049580] ACPI: PCI Interrupt Link [LNKB] (IRQs 7) *11
[    0.049696] ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
[    0.049813] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
[    0.050000] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.050005] vgaarb: loaded
[    0.050208] SCSI subsystem initialized
[    0.050322] libata version 3.00 loaded.
[    0.050436] usbcore: registered new interface driver usbfs
[    0.050454] usbcore: registered new interface driver hub
[    0.050489] usbcore: registered new device driver usb
[    0.050670] ACPI: WMI: Mapper loaded
[    0.050673] PCI: Using ACPI for IRQ routing
[    0.050851] NetLabel: Initializing
[    0.050854] NetLabel:  domain hash size = 128
[    0.050856] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.050880] NetLabel:  unlabeled traffic allowed by default
[    0.050922] Switching to clocksource tsc
[    0.053171] AppArmor: AppArmor Filesystem Enabled
[    0.053226] pnp: PnP ACPI init
[    0.053286] ACPI: bus type pnp registered
[    0.054799] pnp: PnP ACPI: found 9 devices
[    0.054802] ACPI: ACPI bus type pnp unregistered
[    0.054809] PnPBIOS: Disabled by ACPI PNP
[    0.054834] system 00:05: iomem range 0xe0000-0xfffff could not be reserved
[    0.054839] system 00:05: iomem range 0xfedff000-0xfedff3ff has been reserved
[    0.054865] system 00:07: ioport range 0x330-0x331 has been reserved
[    0.054869] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.054873] system 00:07: ioport range 0x1000-0x107f has been reserved
[    0.054877] system 00:07: ioport range 0x1400-0x140f has been reserved
[    0.054880] system 00:07: ioport range 0x1600-0x167f has been reserved
[    0.054884] system 00:07: iomem range 0x2f000000-0x2fffffff could not be reserved
[    0.089743] pci 0000:01:00.0: BAR 6: no parent found for of device [0x0c0000-0x0cffff]
[    0.089774] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.089778] pci 0000:00:01.0:   IO window: 0xc000-0xdfff
[    0.089784] pci 0000:00:01.0:   MEM window: 0xe0000000-0xefffffff
[    0.089789] pci 0000:00:01.0:   PREFETCH window: 0x90000000-0x9fffffff
[    0.089797] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:02
[    0.089801] pci 0000:00:09.0:   IO window: 0x001800-0x0018ff
[    0.089806] pci 0000:00:09.0:   IO window: 0x001c00-0x001cff
[    0.089811] pci 0000:00:09.0:   PREFETCH window: 0x30000000-0x33ffffff
[    0.089816] pci 0000:00:09.0:   MEM window: 0x34000000-0x37ffffff
[    0.089837] pci 0000:00:01.0: setting latency timer to 64
[    0.090058] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
[    0.090062] PCI: setting IRQ 7 as level-triggered
[    0.090070] pci 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[    0.090078] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.090081] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.090085] pci_bus 0000:01: resource 0 io:  [0xc000-0xdfff]
[    0.090088] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xefffffff]
[    0.090091] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x9fffffff]
[    0.090095] pci_bus 0000:02: resource 0 io:  [0x1800-0x18ff]
[    0.090098] pci_bus 0000:02: resource 1 io:  [0x1c00-0x1cff]
[    0.090101] pci_bus 0000:02: resource 2 pref mem [0x30000000-0x33ffffff]
[    0.090105] pci_bus 0000:02: resource 3 mem: [0x34000000-0x37ffffff]
[    0.090169] NET: Registered protocol family 2
[    0.090316] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.091090] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.094232] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.096078] TCP: Hash tables configured (established 131072 bind 65536)
[    0.096083] TCP reno registered
[    0.096316] NET: Registered protocol family 1
[    0.096351] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.096452] pci 0000:01:00.0: Boot video device
[    0.096534] Simple Boot Flag at 0x37 set to 0x1
[    0.096758] cpufreq-nforce2: No nForce2 chipset.
[    0.096796] Scanning for low memory corruption every 60 seconds
[    0.096980] audit: initializing netlink socket (disabled)
[    0.097020] type=2000 audit(1277410568.097:1): initialized
[    0.106827] Trying to unpack rootfs image as initramfs...
[    2.531368] Freeing initrd memory: 7802k freed
[    2.556476] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.558756] VFS: Disk quotas dquot_6.5.2
[    2.558841] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.560569] fuse init (API version 7.13)
[    2.560698] msgmni has been set to 1466
[    2.561088] alg: No test for stdrng (krng)
[    2.561142] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.561147] io scheduler noop registered
[    2.561150] io scheduler anticipatory registered
[    2.561153] io scheduler deadline registered
[    2.561204] io scheduler cfq registered (default)
[    2.561377] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.561413] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.561872] ACPI: AC Adapter [AC] (on-line)
[    2.561999] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    2.562032] ACPI: Sleep Button [SBTN]
[    2.562095] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.562279] ACPI: Lid Switch [LID]
[    2.562360] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.562364] ACPI: Power Button [PWRF]
[    2.562577] Marking TSC unstable due to TSC halts in idle
[    2.562630] processor LNXCPU:00: registered as cooling_device0
[    2.562850] Switching to clocksource acpi_pm
[    2.566049] vesafb: framebuffer at 0x90000000, mapped to 0xef880000, using 1536k, total 1536k
[    2.566054] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    2.566056] vesafb: scrolling: redraw
[    2.566061] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    2.588590] Console: switching to colour frame buffer device 128x48
[    2.610871] fb0: VESA VGA frame buffer device
[    2.610891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.612756] brd: module loaded
[    2.613502] loop: module loaded
[    2.613659] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    2.613935] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
[    2.614097] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
[    2.614540] Fixed MDIO Bus: probed
[    2.614590] PPP generic driver version 2.4.2
[    2.614637] tun: Universal TUN/TAP device driver, 1.6
[    2.614640] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.614748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.615154] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    2.615160] PCI: setting IRQ 11 as level-triggered
[    2.615167] ehci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    2.615206] ehci_hcd 0000:00:10.3: EHCI Host Controller
[    2.615260] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[    2.615350] ehci_hcd 0000:00:10.3: irq 11, io mem 0xf0000000
[    2.615844] isapnp: Scanning for PnP cards...
[    2.928475] isapnp: No Plug & Play device found
[    2.928494] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    2.928712] usb usb1: configuration #1 chosen from 1 choice
[    2.928759] hub 1-0:1.0: USB hub found
[    2.928783] hub 1-0:1.0: 4 ports detected
[    2.928856] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.928874] uhci_hcd: USB Universal Host Controller Interface driver
[    2.929190] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    2.929193] PCI: setting IRQ 10 as level-triggered
[    2.929200] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    2.929209] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.929283] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.929312] uhci_hcd 0000:00:10.0: irq 10, io base 0x00001200
[    2.929461] usb usb2: configuration #1 chosen from 1 choice
[    2.929495] hub 2-0:1.0: USB hub found
[    2.929507] hub 2-0:1.0: 2 ports detected
[    2.929568] uhci_hcd 0000:00:10.1: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[    2.929573] uhci_hcd 0000:00:10.1: VIA VLink IRQ fixup, from 11 to 7
[    2.929596] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.929639] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.929663] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001300
[    2.929791] usb usb3: configuration #1 chosen from 1 choice
[    2.929823] hub 3-0:1.0: USB hub found
[    2.929839] hub 3-0:1.0: 2 ports detected
[    2.929958] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.933425] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.933433] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.933565] mice: PS/2 mouse device common for all mice
[    2.933770] rtc_cmos 00:03: RTC can wake from S4
[    2.933840] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.933866] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    2.933970] device-mapper: uevent: version 1.0.3
[    2.934449] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.934608] device-mapper: multipath: version 1.1.0 loaded
[    2.934632] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.934842] EISA: Probing bus 0 at eisa.0
[    2.934852] Cannot allocate resource for EISA slot 1
[    2.934880] EISA: Detected 0 cards.
[    2.935203] cpuidle: using governor ladder
[    2.935263] cpuidle: using governor menu
[    2.935803] TCP cubic registered
[    2.936041] NET: Registered protocol family 10
[    2.936614] lo: Disabled Privacy Extensions
[    2.936981] NET: Registered protocol family 17
[    2.937051] powernow-k8: Processor cpuid 6a0 not supported
[    2.939881] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
[    2.942966] powernow: SGTC: 13333
[    2.942969] powernow: Minimum speed 663 MHz. Maximum speed 1990 MHz.
[    2.943048] Using IPI No-Shortcut mode
[    2.943220] PM: Resume from disk failed.
[    2.943251] registered taskstats version 1
[    2.943530]   Magic number: 14:644:296
[    2.943613] tty tty29: hash matches
[    2.943733] rtc_cmos 00:03: setting system clock to 2010-06-24 20:16:11 UTC (1277410571)
[    2.943738] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.943741] EDD information not available.
[    2.943823] Freeing unused kernel memory: 680k freed
[    2.945398] Write protecting the kernel text: 4756k
[    2.945441] Write protecting the kernel read-only data: 1852k
[    2.945444] BFS CPU scheduler v0.313 by Con Kolivas.
[    2.947191] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.954539] ACPI: Battery Slot [BAT0] (battery present)
[    3.281074] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    3.389264] Linux agpgart interface v0.103
[    3.392736] agpgart: Detected VIA Apollo Pro266 chipset
[    3.421405] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xa0000000
[    3.550344] usb 1-3: configuration #1 chosen from 1 choice
[    3.790085] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    4.030218] usb 2-2: configuration #1 chosen from 1 choice
[    4.082322] pata_via 0000:00:11.1: version 0.3.4
[    4.082344] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[    4.117058] scsi0 : pata_via
[    4.119948] scsi1 : pata_via
[    4.121096] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[    4.121101] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[    4.306550] ata1.00: ATA-5: TOSHIBA MK3021GAS, GA124A, max UDMA/100
[    4.306559] ata1.00: 58605120 sectors, multi 16: LBA
[    4.309396] ata1.00: configured for UDMA/100
[    4.309648] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3021GA GA12 PQ: 0 ANSI: 5
[    4.309970] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.310194] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
[    4.310252] sd 0:0:0:0: [sda] Write Protect is off
[    4.310256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.310284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.310470]  sda: sda1 sda2 < sda5 >
[    4.460100] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.608868] ata2.01: ATAPI: Slimtype COMBO LSC-24082K, JKU5, max UDMA/33
[    4.647530] ata2.01: configured for UDMA/33
[    4.677257] scsi 1:0:1:0: CD-ROM            Slimtype COMBO LSC-24082K JKU5 PQ: 0 ANSI: 5
[    4.693272] sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
[    4.693285] Uniform CD-ROM driver Revision: 3.20
[    4.693577] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    4.693727] sr 1:0:1:0: Attached scsi generic sg1 type 5
[    4.697909] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    4.697988] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[    4.714924] eth0: VIA Rhine II at 0xf0000100, 00:40:d0:5a:02:2d, IRQ 10.
[    4.715645] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[    4.968321] usbcore: registered new interface driver hiddev
[    4.982763] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input5
[    4.982954] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:10.0-2/input0
[    4.983067] usbcore: registered new interface driver usbhid
[    4.983074] usbhid: v2.6:USB HID core driver
[    5.887342] kjournald starting.  Commit interval 5 seconds
[    5.887365] EXT3-fs: mounted filesystem with ordered data mode.
[   10.453812] udev: starting version 141
[   11.772852] irda_init()
[   11.772902] NET: Registered protocol family 23
[   11.816173] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.001948] yenta_cardbus 0000:00:09.0: CardBus bridge found [1734:1054]
[   12.001977] yenta_cardbus 0000:00:09.0: Using CSCINT to route CSC interrupts to PCI
[   12.001981] yenta_cardbus 0000:00:09.0: Routing CardBus interrupts to PCI
[   12.001988] yenta_cardbus 0000:00:09.0: TI: mfunc 0x010c1002, devctl 0x44
[   12.377183] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0050, PCI irq 7
[   12.377191] yenta_cardbus 0000:00:09.0: Socket status: 30000006
[   13.189528] ACPI: resource vt596_smbus [0x1400-0x1407] conflicts with ACPI region SM06 [0x1406-0x1406]
[   13.189537] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.484764] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   16.067008] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[   16.067039] PCI: setting IRQ 5 as level-triggered
[   16.067047] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[   16.087109] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[   16.601910] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[   16.611754] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   17.033773] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0
[   17.070285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   17.207607] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   17.209516] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   17.210332] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   17.210991] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   17.211866] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   18.533173] Adding 1253368k swap on /dev/sda5.  Priority:-1 extents:1 across:1253368k
[   19.216798] EXT3 FS on sda1, internal journal
[   26.886085] lp: driver loaded but no devices found
[   26.993471] ppdev: user-space parallel port driver
[   34.264301] Bluetooth: Core ver 2.15
[   34.267057] NET: Registered protocol family 31
[   34.267064] Bluetooth: HCI device and connection manager initialized
[   34.267070] Bluetooth: HCI socket layer initialized
[   34.313472] Bluetooth: L2CAP ver 2.14
[   34.313480] Bluetooth: L2CAP socket layer initialized
[   34.418253] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   34.470835] Bluetooth: RFCOMM TTY layer initialized
[   34.470851] Bluetooth: RFCOMM socket layer initialized
[   34.470855] Bluetooth: RFCOMM ver 1.11
[   35.319565] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[   35.335362] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
[   39.423553] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   41.632060] [drm] Initialized drm 1.1.0 20060810
[   41.677170] pci 0000:01:00.0: power state changed by ACPI to D0
[   41.677195] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[   41.677456] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0
[   41.679109] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[   41.679138] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[   41.679200] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[   42.352279] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   53.316061] eth0: no IPv6 routers present
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Felis
Titel:   BeitragVerfasst am: 24.06.2010, 20:57 Uhr



Anmeldung: 18. Okt 2007
Beiträge: 393

Auch wenn ich dir vermutlich nicht weiterhelfen kann, interessieren tät mich schon was dmesg auswirft, wenn du den Stick mal abziehst und wieder ansteckst. Danach diie letzten - neuen - Zeilen von dmesg posten.
Ja und wurde der Treiber nach Reboot geladen?
lsmod | grep rt3572
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
hawidiere
Titel:   BeitragVerfasst am: 25.06.2010, 06:02 Uhr



Anmeldung: 22. Jun 2010
Beiträge: 14

Also auf lsmod | grep rt3572 gibts keine Meldung.
Die letzten Zeilen von dmesg sehen so aus:

Code:
[   39.370424] eth0: link down
[   39.372002] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   41.703368] [drm] Initialized drm 1.1.0 20060810
[   41.719963] pci 0000:01:00.0: power state changed by ACPI to D0
[   41.719987] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (lev                            el, low) -> IRQ 10
[   41.722757] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0                             on minor 0
[   41.723907] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[   41.723934] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x                             mode
[   41.723998] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[  274.924371] usb 1-3: USB disconnect, address 3
[  362.006084] usb 1-3: new high speed USB device using ehci_hcd and ad                            dress 4
[  362.140312] usb 1-3: configuration #1 chosen from 1 choice
[  396.148871] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  396.149728] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  406.381052] eth0: no IPv6 routers present
[  414.003400] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  424.077049] eth0: no IPv6 routers present
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Felis
Titel:   BeitragVerfasst am: 25.06.2010, 11:03 Uhr



Anmeldung: 18. Okt 2007
Beiträge: 393

Ich hab's übersehen! Man muss noch die Firmware für den Stick installieren.
Letztes Paket unten auf der Ralinkseite runterladen.

unzip RT2870_Firmware_V22.zip
cd RT2870_Firmware_V22
su
cp rt2870.bin /lib/firmware

reboot.
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
hawidiere
Titel:   BeitragVerfasst am: 25.06.2010, 12:37 Uhr



Anmeldung: 22. Jun 2010
Beiträge: 14

Hallo Felis, beim letzen Kommando cp rt2870.bin /lib/firmware, kommt die Frage ob die Datei überschrieben werden soll. Lass ich das Leerzeichen
nach bin weg, heißt es fehlender Zieldatei Operand hinter rt2870.bin /lib/firmware.

Was mach ich falsch bzw. was bedeutet daß?
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Kano
Titel:   BeitragVerfasst am: 25.06.2010, 13:45 Uhr



Anmeldung: 17. Dez 2003
Beiträge: 16176

nachdem du den treiber neu entpackt hast und ins verzeichnis gewechselt bist machst mal:

sed -i '/0x0930,0x0A07/a\\t{USB_DEVICE(0x050D,0x935A)},' common/rtusb_dev_id.c

und installierst ne neu, dann den usb stick anstecken, stell sicher, dass du den modulnamen vorher scho aus der /etc/modules entfernt hast. das modul sollte vorher möglichst nicht geladen sein.
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Felis
Titel:   BeitragVerfasst am: 25.06.2010, 16:08 Uhr



Anmeldung: 18. Okt 2007
Beiträge: 393

hawidiere hat folgendes geschrieben::
Hallo Felis, beim letzen Kommando cp rt2870.bin /lib/firmware, kommt die Frage ob die Datei überschrieben werden soll.

In Kanotix ist das Paket linux-firmware und linux-firmware-nonfree enthalten. Offensichtlich ist da diese Firmware schon dabei. Da ich annehme, dass Kano immer die aktuellste Firmware zur Verfügung stellt, ist das drüberkopieren wohl unnötig. Wird wohl identisch sein. In diesem Fall müsstest du die Frage verneinen, und der Vorgang wird abgebrochen.
kopieren grundsätzlich:
Code:
cp datei /pfad/wohin/auch/immer

hawidiere hat folgendes geschrieben::
Lass ich das Leerzeichen
nach bin weg, heißt es fehlender Zieldatei Operand hinter rt2870.bin /lib/firmware.Was mach ich falsch bzw. was bedeutet daß?

Dieser Befehle wäre sinnlos.
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Beiträge vom vorherigen Thema anzeigen:     
Gehe zu:  
Alle Zeiten sind GMT + 1 Stunde
Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
PNphpBB2 © 2003-2007 
 
Deutsch | English
Logos and trademarks are the property of their respective owners, comments are property of their posters, the rest is © 2004 - 2006 by Jörg Schirottke (Kano).
Consult Impressum and Legal Terms for details. Kanotix is Free Software released under the GNU/GPL license.
This CMS is powered by PostNuke, all themes used at this site are released under the GNU/GPL license. designed and hosted by w3you. Our web server is running on Kanotix64-2006.