| Autor |
Nachricht |
|
|
Titel: Netgear WG511T: Verschiedene Probleme
 Verfasst am: 16.08.2006, 17:30 Uhr
|
|
Anmeldung: 14. Aug 2006
Beiträge: 14
Wohnort: Germany
|
|
Hallo Leute,
ich habe mit meiner PCMCIA Karte von Netgear (WG511T) verschiedene Probleme, um sie zum Laufen zu bekommen bzw. ins WLAN zu kommen.
Grundlegend: Es ist ein WLAN mit WEP-Verschlüsselung vorhanden. Ich weiß, dass die Komponenten funktionieren, da unter Windows alles läuft. Jetzt zu den Problemen:
Unter Kernel 2.6.16.16: Die Karte wird erkannt und ich kann auch Zugriff auf das Netzwerk bekommen. Aber obwohl ich DHCP eingestellt habe, bekommt das Notebook keine IP-Adresse. Wo liegt das Problem?
Unter Kernel 2.6.17.8 (den ich dann eigentlich gern verwenden würde): Mit diesem Kernel wird die Karte leider gar nicht erkannt. Ich hab keine Ahnung, was ich noch tun soll. |
|
|
| |
|
|
|
 |
|
|
|
Titel:
Verfasst am: 16.08.2006, 17:43 Uhr
|
|
Anmeldung: 25. Mar 2005
Beiträge: 2133
|
|
|
Zitat:
Aber obwohl ich DHCP eingestellt habe, bekommt das Notebook keine IP-Adresse. Wo liegt das Problem?
Stimmt der WEP-Key? Notebook gleichzeitig mit LAN-Kabel verbunden? Was sagt denn iwconfig? Welcher WLAN-Chip ist in der Karte? Bitte mal /etc/network/interfaces und /etc/resolv.conf posten.
Zitat:
Unter Kernel 2.6.17.8 (den ich dann eigentlich gern verwenden würde): Mit diesem Kernel wird die Karte leider gar nicht erkannt. Ich hab keine Ahnung, was ich noch tun soll.
Nach dem Kernelupdate müssen ggf. die passenden Treiber nachinstalliert werden. Such mal im Ordner /kernel-current, den du beim Unzippen des Updatepakets angelegt hast, nach passenden .deb-Dateien.
Du solltest auch mal im Kanotixarchiv nach "wg511t" recherchieren:
http://archive.kanotix.com/PNphpBB2-search.html |
_________________
And I ain't got no worries 'cause I ain't in no hurry at all (Doobie Brothers, "Black Water").
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 16.08.2006, 18:20 Uhr
|
|
Anmeldung: 16. Aug 2004
Beiträge: 1905
|
|
Mit der Handelsbezeichnung kann man leider wenig anfangen:
/usr/sbin/hwinfo --wlan |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 16.08.2006, 18:27 Uhr
|
|
Anmeldung: 14. Aug 2006
Beiträge: 14
Wohnort: Germany
|
|
1) WEP-Key stimmt.
2) Ich habe es sowohl mit als auch ohne Kabel probiert. Ändert nix.
3) iwconfig:
Code:
lo no wireless extensions.
eth0 no wireless extensions.
4)
Code:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
# automatically added when upgrading
auto lo ath0 eth0
iface lo inet loopback
iface ath0 inet dhcp
wireless-mode Managed
wireless-essid any
pre-up wpa_supplicant -Dwext -iath0 -c/etc/wpa_supplicant.conf -B
iface eth0 inet dhcp
5) resolv.conf:
Code:
search
nameserver 195.50.140.114
nameserver 195.50.140.252
6)
Zitat:
Mit der Handelsbezeichnung kann man leider wenig anfangen:
/usr/sbin/hwinfo --wlan
Da passiert nix.
7) Wie identifiziere ich die Treiber? Wie muss ich die dann nachinstallieren?
Danke für eure Hilfe! |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 16.08.2006, 18:32 Uhr
|
|
Anmeldung: 14. Aug 2006
Beiträge: 14
Wohnort: Germany
|
|
Die komplette Ausgabe von hwinfo (besser habe ich es nicht hinbekommen):
[code:1:f20697dc2d]
============ start hardware log ============
============ start debug info ============
libhd version 13.0 (ia32)
using /var/lib/hardware
kernel version is 2.6
----- /proc/cmdline -----
root=/dev/hda3 ro ramdisk_size=100000 lang=de apm=power-off nomce vga=791
----- /proc/cmdline end -----
debug = 0xff7ffff7
probe = 0x00100000800040010014 (-memory +pci -isapnp +net -floppy -misc -misc.serial -misc.par -misc.floppy -serial -cpu -bios -monitor -mouse -scsi +usb -usb.mods -adb -modem -modem.usb -parallel -parallel.lp -parallel.zip -isa -isa.isdn -isdn -kbd -prom -sbus +int -braille -braille.alva -braille.fhp -braille.ht -ignx11 -sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod -braille.baum -manual -fb -pppoe -scan +pcmcia -fork -parallel.imm -s390 -cpuemu -sysfs -s390disks -udev -block -block.cdrom -block.part -edd -edd.mod -bios.ddc -bios.fb -bios.mode -input -block.mods -bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -bios.vram -max -lxrc)
shm: attached segment 1146882 at 0xb7c26000
>> hal.1: read hal data
hal: connected to: :1.7
----- hal device list -----
0: udi = '/org/freedesktop/Hal/devices/acpi_C190'
info.udi = '/org/freedesktop/Hal/devices/acpi_C190'
linux.hotplug_type = 4 (0x4)
button.has_state = false
info.capabilities = { 'button' }
info.category = 'button'
info.product = 'Sleep Button'
button.type = 'sleep'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 10 (0xa)
linux.acpi_path = '/proc/acpi/button/sleep/C190'
1: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
linux.hotplug_type = 4 (0x4)
button.has_state = false
info.capabilities = { 'button' }
info.category = 'button'
info.product = 'Power Button'
button.type = 'power'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 10 (0xa)
linux.acpi_path = '/proc/acpi/button/power/PWRF'
2: udi = '/org/freedesktop/Hal/devices/acpi_C191'
info.udi = '/org/freedesktop/Hal/devices/acpi_C191'
linux.hotplug_type = 4 (0x4)
button.has_state = true
button.state.value = false
info.capabilities = { 'button' }
info.category = 'button'
info.product = 'Lid Switch'
button.type = 'lid'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 10 (0xa)
linux.acpi_path = '/proc/acpi/button/lid/C191'
3: udi = '/org/freedesktop/Hal/devices/acpi_C18F'
info.udi = '/org/freedesktop/Hal/devices/acpi_C18F'
linux.hotplug_type = 4 (0x4)
ac_adapter.present = true
info.capabilities = { 'ac_adapter' }
info.category = 'ac_adapter'
info.product = 'AC Adapter'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 3 (0x3)
linux.acpi_path = '/proc/acpi/ac_adapter/C18F'
4: udi = '/org/freedesktop/Hal/devices/acpi_C1E3'
info.udi = '/org/freedesktop/Hal/devices/acpi_C1E3'
linux.hotplug_type = 4 (0x4)
fan.enabled = false
info.capabilities = { 'fan' }
info.category = 'fan'
info.product = 'Fan'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 2 (0x2)
linux.acpi_path = '/proc/acpi/fan/C1E3'
5: udi = '/org/freedesktop/Hal/devices/acpi_C1E4'
info.udi = '/org/freedesktop/Hal/devices/acpi_C1E4'
linux.hotplug_type = 4 (0x4)
fan.enabled = false
info.capabilities = { 'fan' }
info.category = 'fan'
info.product = 'Fan'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 2 (0x2)
linux.acpi_path = '/proc/acpi/fan/C1E4'
6: udi = '/org/freedesktop/Hal/devices/acpi_C1E5'
info.udi = '/org/freedesktop/Hal/devices/acpi_C1E5'
linux.hotplug_type = 4 (0x4)
fan.enabled = true
info.capabilities = { 'fan' }
info.category = 'fan'
info.product = 'Fan'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 2 (0x2)
linux.acpi_path = '/proc/acpi/fan/C1E5'
7: udi = '/org/freedesktop/Hal/devices/acpi_C000'
info.udi = '/org/freedesktop/Hal/devices/acpi_C000'
linux.hotplug_type = 4 (0x4)
processor.can_throttle = true
processor.number = 0 (0x0)
info.capabilities = { 'processor' }
info.category = 'processor'
info.product = 'Processor'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 1 (0x1)
linux.acpi_path = '/proc/acpi/processor/C000'
8: udi = '/org/freedesktop/Hal/devices/acpi_C18B'
info.udi = '/org/freedesktop/Hal/devices/acpi_C18B'
linux.hotplug_type = 4 (0x4)
battery.charge_level.percentage = 98 (0x62)
battery.charge_level.rate = 0 (0x0)
battery.charge_level.last_full = 536989 (0x8319d)
battery.charge_level.current = 527799 (0x80db7)
battery.voltage.current = 16239 (0x3f6f)
battery.reporting.rate = 0 (0x0)
battery.reporting.current = 527799 (0x80db7)
battery.charge_level.capacity_state = 'ok'
battery.rechargeable.is_discharging = false
battery.rechargeable.is_charging = false
battery.is_rechargeable = true
battery.charge_level.unit = 'mWh'
battery.charge_level.granularity_2 = 10 (0xa)
battery.charge_level.granularity_1 = 10 (0xa)
battery.charge_level.low = 0 (0x0)
battery.charge_level.warning = 0 (0x0)
battery.charge_level.design = 54720 (0xd5c0)
battery.voltage.design = 15999 (0x3e7f)
battery.voltage.unit = 'mV'
battery.reporting.granularity_2 = 10 (0xa)
battery.reporting.granularity_1 = 10 (0xa)
battery.reporting.low = 0 (0x0)
battery.reporting.warning = 0 (0x0)
battery.reporting.design = 54720 (0xd5c0)
battery.reporting.last_full = 536989 (0x8319d)
battery.reporting.unit = 'mWh'
battery.technology = 'LIon'
battery.serial = '000000454120EB0067'
battery.model = 'Primary'
battery.vendor = 'COMPAQ'
battery.present = true
info.capabilities = { 'battery' }
info.category = 'battery'
battery.type = 'primary'
info.product = 'Battery Bay'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 0 (0x0)
linux.acpi_path = '/proc/acpi/battery/C18B'
9: udi = '/org/freedesktop/Hal/devices/acpi_C18C'
info.udi = '/org/freedesktop/Hal/devices/acpi_C18C'
linux.hotplug_type = 4 (0x4)
battery.present = false
info.capabilities = { 'battery' }
info.category = 'battery'
battery.type = 'primary'
info.product = 'Battery Bay'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 0 (0x0)
linux.acpi_path = '/proc/acpi/battery/C18C'
10: udi = '/org/freedesktop/Hal/devices/acpi_C18D'
info.udi = '/org/freedesktop/Hal/devices/acpi_C18D'
linux.hotplug_type = 4 (0x4)
battery.present = false
info.capabilities = { 'battery' }
info.category = 'battery'
battery.type = 'primary'
info.product = 'Battery Bay'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 0 (0x0)
linux.acpi_path = '/proc/acpi/battery/C18D'
11: udi = '/org/freedesktop/Hal/devices/acpi_C18E'
info.udi = '/org/freedesktop/Hal/devices/acpi_C18E'
linux.hotplug_type = 4 (0x4)
battery.present = false
info.capabilities = { 'battery' }
info.category = 'battery'
battery.type = 'primary'
info.product = 'Battery Bay'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.acpi_type = 0 (0x0)
linux.acpi_path = '/proc/acpi/battery/C18E'
12: udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid=' }
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
block.storage_device = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
info.capabilities = { 'storage', 'block' }
info.category = 'storage'
storage.requires_eject = false
storage.hotpluggable = false
storage.removable = true
storage.physical_device = '/org/freedesktop/Hal/devices/platform_floppy_0'
storage.drive_type = 'floppy'
info.product = 'PC Floppy Drive'
info.vendor = ''
storage.vendor = 'PC Floppy Drive'
storage.model = ''
storage.automount_enabled_hint = true
storage.media_check_enabled = false
storage.no_partitions_hint = true
storage.bus = 'platform'
block.is_volume = false
block.minor = 0 (0x0)
block.major = 2 (0x2)
block.device = '/dev/fd0'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/platform_floppy_0'
linux.sysfs_path_device = '/sys/block/fd0'
linux.sysfs_path = '/sys/block/fd0'
13: udi = '/org/freedesktop/Hal/devices/volume_uuid_C2AC7F56AC7F4447'
volume.unmount.valid_options = { 'lazy' }
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet' }
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
volume.ignore = false
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_C2AC7F56AC7F4447'
volume.partition.msdos_part_table_type = 7 (0x7)
info.product = 'Volume (ntfs)'
volume.size = 42964959744ull (0xa00e94200ull)
volume.num_blocks = 83915937 (0x50074a1)
volume.block_size = 512 (0x200)
volume.partition.number = 1 (0x1)
info.capabilities = { 'volume', 'block' }
info.category = 'volume'
volume.is_partition = true
volume.is_disc = false
volume.is_mounted = true
volume.mount_point = '/media/hda1'
volume.label = ''
volume.uuid = 'C2AC7F56AC7F4447'
volume.fsversion = '3.1'
volume.fsusage = 'filesystem'
volume.fstype = 'ntfs'
storage.model = ''
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S042J10L582219'
block.is_volume = true
block.minor = 1 (0x1)
block.major = 3 (0x3)
block.device = '/dev/hda1'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S042J10L582219'
linux.sysfs_path_device = '/sys/block/hda/hda1'
linux.sysfs_path = '/sys/block/hda/hda1'
14: udi = '/org/freedesktop/Hal/devices/volume_part2_size_518192640'
info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_518192640'
volume.partition.msdos_part_table_type = 130 (0x82)
info.product = 'Volume (swap)'
volume.size = 518192640ull (0x1ee2fe00ull)
volume.num_blocks = 1012095 (0xf717f)
volume.block_size = 512 (0x200)
volume.partition.number = 2 (0x2)
info.capabilities = { 'volume', 'block' }
info.category = 'volume'
volume.is_partition = true
volume.is_disc = false
volume.is_mounted = false
volume.mount_point = ''
volume.label = ''
volume.uuid = ''
volume.fsversion = '2'
volume.fsusage = 'other'
volume.fstype = 'swap'
storage.model = ''
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S042J10L582219'
block.is_volume = true
block.minor = 2 (0x2)
block.major = 3 (0x3)
block.device = '/dev/hda2'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S042J10L582219'
linux.sysfs_path_device = '/sys/block/hda/hda2'
linux.sysfs_path = '/sys/block/hda/hda2'
15: udi = '/org/freedesktop/Hal/devices/volume_uuid_6b92f3cb_48b4_4dbe_8975_cdfc47f36b7c'
volume.unmount.valid_options = { 'lazy' }
volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet' }
org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
volume.ignore = false
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_6b92f3cb_48b4_4dbe_8975_cdfc47f36b7c'
volume.partition.msdos_part_table_type = 131 (0x83)
info.product = 'Volume (reiserfs)'
volume.size = 36569594880ull (0x883b7bc00ull)
volume.num_blocks = 71424990 (0x441dbde)
volume.block_size = 512 (0x200)
volume.partition.number = 3 (0x3)
info.capabilities = { 'volume', 'block' }
info.category = 'volume'
volume.is_partition = true
volume.is_disc = false
volume.is_mounted = true
volume.mount_point = '/'
volume.label = ''
volume.uuid = '6b92f3cb-48b4-4dbe-8975-cdfc47f36b7c'
volume.fsversion = '3.6'
volume.fsusage = 'filesystem'
volume.fstype = 'reiserfs'
storage.model = ''
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S042J10L582219'
block.is_volume = true
block.minor = 3 (0x3)
block.major = 3 (0x3)
block.device = '/dev/hda3'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_S042J10L582219'
linux.sysfs_path_device = '/sys/block/hda/hda3'
linux.sysfs_path = '/sys/block/hda/hda3'
16: udi = '/org/freedesktop/Hal/devices/storage_serial_S042J10L582219'
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S042J10L582219'
info.udi = '/org/freedesktop/Hal/devices/storage_serial_S042J10L582219'
storage.requires_eject = false
storage.hotpluggable = false
info.capabilities = { 'storage', 'block' }
info.category = 'storage'
info.product = 'SAMSUNG MP0804H'
storage.removable = false
storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
storage.firmware_version = 'UE100-14'
storage.serial = 'S042J10L582219'
storage.vendor = ''
storage.model = 'SAMSUNG MP0804H'
storage.drive_type = 'disk'
storage.automount_enabled_hint = true
storage.media_check_enabled = false
storage.no_partitions_hint = false
storage.bus = 'ide'
block.is_volume = false
block.minor = 0 (0x0)
block.major = 3 (0x3)
block.device = '/dev/hda'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
linux.sysfs_path_device = '/sys/block/hda'
linux.sysfs_path = '/sys/block/hda'
17: udi = '/org/freedesktop/Hal/devices/storage_serial_X2ZA909600'
info.addons = { 'hald-addon-storage' }
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_X2ZA909600'
info.udi = '/org/freedesktop/Hal/devices/storage_serial_X2ZA909600'
storage.cdrom.write_speed = 0 (0x0)
storage.cdrom.read_speed = 4234 (0x108a)
storage.cdrom.support_media_changed = true
storage.cdrom.hddvdrw = false
storage.cdrom.hddvdr = false
storage.cdrom.hddvd = false
storage.cdrom.bdre = false
storage.cdrom.bdr = false
storage.cdrom.bd = false
storage.cdrom.dvdplusrdl = false
storage.cdrom.dvdplusrw = false
storage.cdrom.dvdplusr = false
storage.cdrom.dvdram = false
storage.cdrom.dvdrw = false
storage.cdrom.dvdr = false
storage.cdrom.dvd = true
storage.cdrom.cdrw = false
storage.cdrom.cdr = false
storage.requires_eject = true
storage.hotpluggable = false
info.capabilities = { 'storage', 'block', 'storage.cdrom' }
info.category = 'storage'
info.product = 'Compaq DVD-ROM SD-C2512'
storage.removable = true
storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
storage.firmware_version = '1A13'
storage.serial = 'X2ZA909600'
storage.vendor = ''
storage.model = 'Compaq DVD-ROM SD-C2512'
storage.drive_type = 'cdrom'
storage.automount_enabled_hint = true
storage.media_check_enabled = true
storage.no_partitions_hint = true
storage.bus = 'ide'
block.is_volume = false
block.minor = 0 (0x0)
block.major = 22 (0x16)
block.device = '/dev/hdc'
linux.hotplug_type = 3 (0x3)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
linux.sysfs_path_device = '/sys/block/hdc'
linux.sysfs_path = '/sys/block/hdc'
18: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
linux.device_file = '/dev/snd/timer'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
alsa.device_file = '/dev/snd/timer'
info.product = 'ALSA Timer Device'
alsa.type = 'timer'
info.capabilities = { 'alsa' }
info.category = 'alsa'
info.parent = '/org/freedesktop/Hal/devices/computer'
linux.sysfs_path = '/sys/class/sound/timer'
19: udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
input.product = 'PC Speaker'
info.product = 'PC Speaker'
linux.device_file = '/dev/input/event1'
linux.subsystem = 'input'
linux.hotplug_type = 2 (0x2)
input.device = '/dev/input/event1'
info.capabilities = { 'input' }
info.category = 'input'
info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'
input.physical_device = '/org/freedesktop/Hal/devices/platform_pcspkr'
linux.sysfs_path = '/sys/class/input/input1/event1'
20: udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (pcspkr)'
platform.id = 'pcspkr'
info.linux.driver = 'pcspkr'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/pcspkr'
linux.sysfs_path = '/sys/devices/platform/pcspkr'
21: udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (vesafb.0)'
platform.id = 'vesafb.0'
info.linux.driver = 'vesafb'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/vesafb.0'
linux.sysfs_path = '/sys/devices/platform/vesafb.0'
22: udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (floppy.0)'
platform.id = 'floppy.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/floppy.0'
linux.sysfs_path = '/sys/devices/platform/floppy.0'
23: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_0_Port'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_0_Port'
linux.subsystem = 'serio'
linux.hotplug_type = 1 (0x1)
info.product = 'i8042 Aux-0 Port'
serio.description = 'i8042 Aux-0 Port'
serio.id = 'serio0'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
info.bus = 'serio'
linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
24: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_1_Port'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_1_Port'
linux.subsystem = 'serio'
linux.hotplug_type = 1 (0x1)
info.product = 'i8042 Aux-1 Port'
serio.description = 'i8042 Aux-1 Port'
serio.id = 'serio1'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
info.bus = 'serio'
linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
25: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_2_Port'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_2_Port'
linux.subsystem = 'serio'
linux.hotplug_type = 1 (0x1)
info.product = 'i8042 Aux-2 Port'
serio.description = 'i8042 Aux-2 Port'
serio.id = 'serio2'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
info.bus = 'serio'
linux.sysfs_path_device = '/sys/devices/platform/i8042/serio2'
linux.sysfs_path = '/sys/devices/platform/i8042/serio2'
26: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port_logicaldev_input'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port_logicaldev_input'
input.product = 'SynPS/2 Synaptics TouchPad'
info.product = 'SynPS/2 Synaptics TouchPad'
linux.device_file = '/dev/input/event2'
linux.subsystem = 'input'
linux.hotplug_type = 2 (0x2)
input.device = '/dev/input/event2'
info.capabilities = { 'input', 'input.tablet' }
info.category = 'input'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'
input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'
linux.sysfs_path = '/sys/class/input/input2/event2'
27: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_3_Port'
linux.subsystem = 'serio'
linux.hotplug_type = 1 (0x1)
info.product = 'i8042 Aux-3 Port'
serio.description = 'i8042 Aux-3 Port'
serio.id = 'serio3'
info.linux.driver = 'psmouse'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
info.bus = 'serio'
linux.sysfs_path_device = '/sys/devices/platform/i8042/serio3'
linux.sysfs_path = '/sys/devices/platform/i8042/serio3'
28: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
button.has_state = false
button.type = ''
info.addons = { 'hald-addon-keyboard' }
input.product = 'AT Translated Set 2 keyboard'
info.product = 'AT Translated Set 2 keyboard'
linux.device_file = '/dev/input/event0'
linux.subsystem = 'input'
linux.hotplug_type = 2 (0x2)
input.device = '/dev/input/event0'
info.capabilities = { 'input', 'input.keyboard', 'button' }
info.category = 'input'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
linux.sysfs_path = '/sys/class/input/input0/event0'
29: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
linux.subsystem = 'serio'
linux.hotplug_type = 1 (0x1)
info.product = 'i8042 Kbd Port'
serio.description = 'i8042 Kbd Port'
serio.id = 'serio4'
info.linux.driver = 'atkbd'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
info.bus = 'serio'
linux.sysfs_path_device = '/sys/devices/platform/i8042/serio4'
linux.sysfs_path = '/sys/devices/platform/i8042/serio4'
30: udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.udi = '/org/freedesktop/Hal/devices/platform_i8042'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (i8042)'
platform.id = 'i8042'
info.linux.driver = 'i8042'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/i8042'
linux.sysfs_path = '/sys/devices/platform/i8042'
31: udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (eisa.0)'
platform.id = 'eisa.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/eisa.0'
linux.sysfs_path = '/sys/devices/platform/eisa.0'
32: udi = '/org/freedesktop/Hal/devices/platform_serial8250_serial_platform_2'
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250_serial_platform_2'
linux.device_file = '/dev/ttyS2'
linux.subsystem = 'tty'
linux.hotplug_type = 2 (0x2)
info.product = 'Platform Device (serial8250)'
serial.type = 'platform'
serial.port = 2 (0x2)
serial.device = '/dev/ttyS2'
serial.physical_device = '/org/freedesktop/Hal/devices/platform_serial8250'
info.capabilities = { 'serial' }
info.category = 'serial'
info.parent = '/org/freedesktop/Hal/devices/platform_serial8250'
linux.sysfs_path = '/sys/class/tty/ttyS2'
33: udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'
linux.subsystem = 'platform'
linux.hotplug_type = 1 (0x1)
info.product = 'Platform Device (serial8250)'
platform.id = 'serial8250'
info.linux.driver = 'serial8250'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'platform'
linux.sysfs_path_device = '/sys/devices/platform/serial8250'
linux.sysfs_path = '/sys/devices/platform/serial8250'
34: udi = '/org/freedesktop/Hal/devices/pci_8086_3575'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_3575'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x00b4)'
pci.subsys_vendor = 'Compaq Computer Corporation'
info.product = '82830 830 Chipset Host Bridge'
pci.product = '82830 830 Chipset Host Bridge'
info.vendor = 'Intel Corporation'
pci.vendor = 'Intel Corporation'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 3601 (0xe11)
pci.subsys_product_id = 180 (0xb4)
pci.vendor_id = 32902 (0x8086)
pci.product_id = 13685 (0x3575)
info.linux.driver = 'agpgart-intel'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
35: udi = '/org/freedesktop/Hal/devices/pci_1002_4c59'
info.udi = '/org/freedesktop/Hal/devices/pci_1002_4c59'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x00b4)'
pci.subsys_vendor = 'Compaq Computer Corporation'
info.product = 'Radeon Mobility M6 LY'
pci.product = 'Radeon Mobility M6 LY'
info.vendor = 'ATI Technologies Inc'
pci.vendor = 'ATI Technologies Inc'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 3 (0x3)
pci.subsys_vendor_id = 3601 (0xe11)
pci.subsys_product_id = 180 (0xb4)
pci.vendor_id = 4098 (0x1002)
pci.product_id = 19545 (0x4c59)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_3576'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
36: udi = '/org/freedesktop/Hal/devices/pci_8086_3576'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_3576'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = '82830 830 Chipset AGP Bridge'
pci.product = '82830 830 Chipset AGP Bridge'
info.vendor = 'Intel Corporation'
pci.vendor = 'Intel Corporation'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 4 (0x4)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 32902 (0x8086)
pci.product_id = 13686 (0x3576)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
37: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_0_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_0_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB Hub Interface'
usb.interface.protocol = 0 (0x0)
usb.interface.subclass = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.number = 0 (0x0)
info.linux.driver = 'hub'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0/usb1/1-0:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 9 (0x9)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 0 (0x0)
usb.product_id = 0 (0x0)
usb.vendor = 'Linux 2.6.17.8-slh-up-1 ohci_hcd'
usb.product = 'USB Hub Interface'
usb.device_revision_bcd = 518 (0x206)
usb.max_power = 0 (0x0)
usb.num_ports = 3 (0x3)
usb.linux.device_number = 1 (0x1)
usb.serial = '0000:02:02.0'
usb.speed_bcd = 4608 (0x1200)
usb.version_bcd = 272 (0x110)
usb.is_self_powered = true
usb.can_wake_up = true
usb.bus_number = 1 (0x1)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_0'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0/usb1/1-0:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0/usb1/1-0:1.0'
38: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_0_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_0_usbraw'
linux.device_file = '/dev/bus/usb/001/001'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/001/001'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_0'
linux.sysfs_path = '/sys/class/usb_device/usbdev1.1'
39: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 1 (0x1)
usb_device.can_wake_up = true
usb_device.is_self_powered = true
usb_device.version_bcd = 272 (0x110)
usb_device.speed_bcd = 4608 (0x1200)
usb_device.serial = '0000:02:02.0'
usb_device.linux.device_number = 1 (0x1)
usb_device.num_ports = 3 (0x3)
usb_device.max_power = 0 (0x0)
usb_device.device_revision_bcd = 518 (0x206)
info.product = 'OHCI Host Controller'
usb_device.product = 'OHCI Host Controller'
info.vendor = 'Linux 2.6.17.8-slh-up-1 ohci_hcd'
usb_device.vendor = 'Linux 2.6.17.8-slh-up-1 ohci_hcd'
usb_device.product_id = 0 (0x0)
usb_device.vendor_id = 0 (0x0)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 9 (0x9)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0/usb1'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/pci_1033_35_0'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0/usb1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0/usb1'
40: udi = '/org/freedesktop/Hal/devices/pci_1033_35_0'
info.udi = '/org/freedesktop/Hal/devices/pci_1033_35_0'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x00b4)'
pci.subsys_vendor = 'Compaq Computer Corporation'
info.product = 'USB'
pci.product = 'USB'
info.vendor = 'NEC Corporation'
pci.vendor = 'NEC Corporation'
pci.device_protocol = 16 (0x10)
pci.device_subclass = 3 (0x3)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 3601 (0xe11)
pci.subsys_product_id = 180 (0xb4)
pci.vendor_id = 4147 (0x1033)
pci.product_id = 53 (0x35)
info.linux.driver = 'ohci_hcd'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0'
41: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_1_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_1_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB Hub Interface'
usb.interface.protocol = 0 (0x0)
usb.interface.subclass = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.number = 0 (0x0)
info.linux.driver = 'hub'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2/2-0:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 9 (0x9)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 0 (0x0)
usb.product_id = 0 (0x0)
usb.vendor = 'Linux 2.6.17.8-slh-up-1 ohci_hcd'
usb.product = 'USB Hub Interface'
usb.device_revision_bcd = 518 (0x206)
usb.max_power = 0 (0x0)
usb.num_ports = 2 (0x2)
usb.linux.device_number = 1 (0x1)
usb.serial = '0000:02:02.1'
usb.speed_bcd = 4608 (0x1200)
usb.version_bcd = 272 (0x110)
usb.is_self_powered = true
usb.can_wake_up = true
usb.bus_number = 2 (0x2)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_1'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2/2-0:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2/2-0:1.0'
42: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial_if0_logicaldev_input'
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial_if0_logicaldev_input'
input.product = 'Logitech USB-PS/2 Optical Mouse'
info.product = 'Logitech USB-PS/2 Optical Mouse'
linux.device_file = '/dev/input/event3'
linux.subsystem = 'input'
linux.hotplug_type = 2 (0x2)
input.device = '/dev/input/event3'
info.capabilities = { 'input', 'input.mouse' }
info.category = 'input'
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial_if0'
input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial_if0'
linux.sysfs_path = '/sys/class/input/input3/event3'
43: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB HID Interface'
usb.interface.protocol = 2 (0x2)
usb.interface.subclass = 1 (0x1)
usb.interface.class = 3 (0x3)
usb.interface.number = 0 (0x0)
info.linux.driver = 'usbhid'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2/2-2/2-2:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 0 (0x0)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 0 (0x0)
usb.vendor_id = 1133 (0x46d)
usb.product_id = 49170 (0xc012)
usb.vendor = 'Logitech'
usb.product = 'USB HID Interface'
usb.device_revision_bcd = 4864 (0x1300)
usb.max_power = 98 (0x62)
usb.num_ports = 0 (0x0)
usb.linux.device_number = 4 (0x4)
usb.speed_bcd = 336 (0x150)
usb.version_bcd = 512 (0x200)
usb.is_self_powered = false
usb.can_wake_up = true
usb.bus_number = 2 (0x2)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2/2-2/2-2:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2/2-2/2-2:1.0'
44: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial_usbraw'
linux.device_file = '/dev/bus/usb/002/004'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/002/004'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial'
linux.sysfs_path = '/sys/class/usb_device/usbdev2.4'
45: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial'
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c012_noserial'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 2 (0x2)
usb_device.can_wake_up = true
usb_device.is_self_powered = false
usb_device.version_bcd = 512 (0x200)
usb_device.speed_bcd = 336 (0x150)
usb_device.linux.device_number = 4 (0x4)
usb_device.num_ports = 0 (0x0)
usb_device.max_power = 98 (0x62)
usb_device.device_revision_bcd = 4864 (0x1300)
info.product = 'USB-PS/2 Optical Mouse'
usb_device.product = 'USB-PS/2 Optical Mouse'
info.vendor = 'Logitech'
usb_device.vendor = 'Logitech'
usb_device.product_id = 49170 (0xc012)
usb_device.vendor_id = 1133 (0x46d)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 0 (0x0)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2/2-2'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_1'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2/2-2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2/2-2'
46: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_1_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_1_usbraw'
linux.device_file = '/dev/bus/usb/002/001'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/002/001'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_1'
linux.sysfs_path = '/sys/class/usb_device/usbdev2.1'
47: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_1'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_1'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 2 (0x2)
usb_device.can_wake_up = true
usb_device.is_self_powered = true
usb_device.version_bcd = 272 (0x110)
usb_device.speed_bcd = 4608 (0x1200)
usb_device.serial = '0000:02:02.1'
usb_device.linux.device_number = 1 (0x1)
usb_device.num_ports = 2 (0x2)
usb_device.max_power = 0 (0x0)
usb_device.device_revision_bcd = 518 (0x206)
info.product = 'OHCI Host Controller'
usb_device.product = 'OHCI Host Controller'
info.vendor = 'Linux 2.6.17.8-slh-up-1 ohci_hcd'
usb_device.vendor = 'Linux 2.6.17.8-slh-up-1 ohci_hcd'
usb_device.product_id = 0 (0x0)
usb_device.vendor_id = 0 (0x0)
usb_device.device_protocol = 0 (0x0)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 9 (0x9)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/pci_1033_35'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1/usb2'
48: udi = '/org/freedesktop/Hal/devices/pci_1033_35'
info.udi = '/org/freedesktop/Hal/devices/pci_1033_35'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x00b4)'
pci.subsys_vendor = 'Compaq Computer Corporation'
info.product = 'USB'
pci.product = 'USB'
info.vendor = 'NEC Corporation'
pci.vendor = 'NEC Corporation'
pci.device_protocol = 16 (0x10)
pci.device_subclass = 3 (0x3)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 3601 (0xe11)
pci.subsys_product_id = 180 (0xb4)
pci.vendor_id = 4147 (0x1033)
pci.product_id = 53 (0x35)
info.linux.driver = 'ohci_hcd'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.1'
49: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_2_if0'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_2_if0'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
info.product = 'USB Hub Interface'
usb.interface.protocol = 0 (0x0)
usb.interface.subclass = 0 (0x0)
usb.interface.class = 9 (0x9)
usb.interface.number = 0 (0x0)
info.linux.driver = 'hub'
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.2/usb3/3-0:1.0'
usb.configuration_value = 1 (0x1)
usb.num_configurations = 1 (0x1)
usb.num_interfaces = 1 (0x1)
usb.device_class = 9 (0x9)
usb.device_subclass = 0 (0x0)
usb.device_protocol = 1 (0x1)
usb.vendor_id = 0 (0x0)
usb.product_id = 0 (0x0)
usb.vendor = 'Linux 2.6.17.8-slh-up-1 ehci_hcd'
usb.product = 'USB Hub Interface'
usb.device_revision_bcd = 518 (0x206)
usb.max_power = 0 (0x0)
usb.num_ports = 5 (0x5)
usb.linux.device_number = 1 (0x1)
usb.serial = '0000:02:02.2'
usb.speed_bcd = 294912 (0x48000)
usb.version_bcd = 512 (0x200)
usb.is_self_powered = true
usb.can_wake_up = true
usb.bus_number = 3 (0x3)
info.bus = 'usb'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_2'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.2/usb3/3-0:1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.2/usb3/3-0:1.0'
50: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_2_usbraw'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_2_usbraw'
linux.device_file = '/dev/bus/usb/003/001'
linux.subsystem = 'usb_device'
linux.hotplug_type = 2 (0x2)
usbraw.device = '/dev/bus/usb/003/001'
info.product = 'USB Raw Device Access'
info.capabilities = { 'usbraw' }
info.category = 'usbraw'
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_2'
linux.sysfs_path = '/sys/class/usb_device/usbdev3.1'
51: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_2'
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_02_02_2'
linux.subsystem = 'usb'
linux.hotplug_type = 1 (0x1)
usb_device.bus_number = 3 (0x3)
usb_device.can_wake_up = true
usb_device.is_self_powered = true
usb_device.version_bcd = 512 (0x200)
usb_device.speed_bcd = 294912 (0x48000)
usb_device.serial = '0000:02:02.2'
usb_device.linux.device_number = 1 (0x1)
usb_device.num_ports = 5 (0x5)
usb_device.max_power = 0 (0x0)
usb_device.device_revision_bcd = 518 (0x206)
info.product = 'EHCI Host Controller'
usb_device.product = 'EHCI Host Controller'
info.vendor = 'Linux 2.6.17.8-slh-up-1 ehci_hcd'
usb_device.vendor = 'Linux 2.6.17.8-slh-up-1 ehci_hcd'
usb_device.product_id = 0 (0x0)
usb_device.vendor_id = 0 (0x0)
usb_device.device_protocol = 1 (0x1)
usb_device.device_subclass = 0 (0x0)
usb_device.device_class = 9 (0x9)
usb_device.num_interfaces = 1 (0x1)
usb_device.num_configurations = 1 (0x1)
usb_device.configuration_value = 1 (0x1)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.2/usb3'
info.linux.driver = 'usb'
info.bus = 'usb_device'
info.parent = '/org/freedesktop/Hal/devices/pci_1033_e0'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.2/usb3'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.2/usb3'
52: udi = '/org/freedesktop/Hal/devices/pci_1033_e0'
info.udi = '/org/freedesktop/Hal/devices/pci_1033_e0'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x00b4)'
pci.subsys_vendor = 'Compaq Computer Corporation'
info.product = 'USB 2.0'
pci.product = 'USB 2.0'
info.vendor = 'NEC Corporation'
pci.vendor = 'NEC Corporation'
pci.device_protocol = 32 (0x20)
pci.device_subclass = 3 (0x3)
pci.device_class = 12 (0xc)
pci.subsys_vendor_id = 3601 (0xe11)
pci.subsys_product_id = 180 (0xb4)
pci.vendor_id = 4147 (0x1033)
pci.product_id = 224 (0xe0)
info.linux.driver = 'ehci_hcd'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.2'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.2'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.2'
53: udi = '/org/freedesktop/Hal/devices/pci_168c_13'
info.udi = '/org/freedesktop/Hal/devices/pci_168c_13'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x4b00)'
pci.subsys_vendor = 'Netgear'
info.product = 'AR5212 802.11abg NIC'
pci.product = 'AR5212 802.11abg NIC'
info.vendor = 'Atheros Communications, Inc.'
pci.vendor = 'Atheros Communications, Inc.'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 2 (0x2)
pci.subsys_vendor_id = 4997 (0x1385)
pci.subsys_product_id = 19200 (0x4b00)
pci.vendor_id = 5772 (0x168c)
pci.product_id = 19 (0x13)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0/0000:03:00.0'
info.parent = '/org/freedesktop/Hal/devices/pci_104c_ac50'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0/0000:03:00.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0/0000:03:00.0'
54: udi = '/org/freedesktop/Hal/devices/pci_104c_ac50'
info.udi = '/org/freedesktop/Hal/devices/pci_104c_ac50'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x00b4)'
pci.subsys_vendor = 'Compaq Computer Corporation'
info.product = 'PCI1410 PC card Cardbus Controller'
pci.product = 'PCI1410 PC card Cardbus Controller'
info.vendor = 'Texas Instruments'
pci.vendor = 'Texas Instruments'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 7 (0x7)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 3601 (0xe11)
pci.subsys_product_id = 180 (0xb4)
pci.vendor_id = 4172 (0x104c)
pci.product_id = 44112 (0xac50)
info.linux.driver = 'yenta_cardbus'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0'
55: udi = '/org/freedesktop/Hal/devices/net_00_d0_59_94_3d_20'
info.udi = '/org/freedesktop/Hal/devices/net_00_d0_59_94_3d_20'
linux.subsystem = 'net'
linux.hotplug_type = 2 (0x2)
net.80203.mac_address = 894856084768ull (0xd059943d20ull)
info.product = 'Networking Interface'
net.interface_up = true
net.arp_proto_hw_id = 1 (0x1)
net.linux.ifindex = 2 (0x2)
net.address = '00:d0:59:94:3d:20'
net.interface = 'eth0'
net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_1229'
info.capabilities = { 'net', 'net.80203' }
info.category = 'net.80203'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_1229'
linux.sysfs_path = '/sys/class/net/eth0'
56: udi = '/org/freedesktop/Hal/devices/pci_8086_1229'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_1229'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'EtherExpress PRO/100 P Mobile Combo Adapter'
pci.subsys_vendor = 'Intel Corporation'
info.product = '82557/8/9 [Ethernet Pro 100]'
pci.product = '82557/8/9 [Ethernet Pro 100]'
info.vendor = 'Intel Corporation'
pci.vendor = 'Intel Corporation'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 2 (0x2)
pci.subsys_vendor_id = 32902 (0x8086)
pci.subsys_product_id = 8705 (0x2201)
pci.vendor_id = 32902 (0x8086)
pci.product_id = 4649 (0x1229)
info.linux.driver = 'e100'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0'
57: udi = '/org/freedesktop/Hal/devices/pci_11c1_45c'
info.udi = '/org/freedesktop/Hal/devices/pci_11c1_45c'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x2201)'
pci.subsys_vendor = 'Intel Corporation'
info.product = 'LT WinModem'
pci.product = 'LT WinModem'
info.vendor = 'Agere Systems'
pci.vendor = 'Agere Systems'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 0 (0x0)
pci.device_class = 7 (0x7)
pci.subsys_vendor_id = 32902 (0x8086)
pci.subsys_product_id = 8705 (0x2201)
pci.vendor_id = 4545 (0x11c1)
pci.product_id = 1116 (0x45c)
info.linux.driver = 'serial'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.1'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.1'
58: udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = '82801 Mobile PCI Bridge'
pci.product = '82801 Mobile PCI Bridge'
info.vendor = 'Intel Corporation'
pci.vendor = 'Intel Corporation'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 4 (0x4)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 32902 (0x8086)
pci.product_id = 9288 (0x2448)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
59: udi = '/org/freedesktop/Hal/devices/pci_8086_248c'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_248c'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x0000)'
pci.subsys_vendor = 'Unknown (0x0000)'
info.product = '82801CAM ISA Bridge (LPC)'
pci.product = '82801CAM ISA Bridge (LPC)'
info.vendor = 'Intel Corporation'
pci.vendor = 'Intel Corporation'
pci.device_protocol = 0 (0x0)
pci.device_subclass = 1 (0x1)
pci.device_class = 6 (0x6)
pci.subsys_vendor_id = 0 (0x0)
pci.subsys_product_id = 0 (0x0)
pci.vendor_id = 32902 (0x8086)
pci.product_id = 9356 (0x248c)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
60: udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
linux.subsystem = 'ide'
linux.hotplug_type = 1 (0x1)
info.product = 'IDE device (master)'
ide.channel = 0 (0x0)
ide.host = 0 (0x0)
info.linux.driver = 'ide-disk'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a'
info.bus = 'ide'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
61: udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
linux.subsystem = 'ide'
linux.hotplug_type = 1 (0x1)
info.product = 'IDE device (master)'
ide.channel = 0 (0x0)
ide.host = 1 (0x1)
info.linux.driver = 'ide-cdrom'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a'
info.bus = 'ide'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide1/1.0'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide1/1.0'
62: udi = '/org/freedesktop/Hal/devices/pci_8086_248a'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_248a'
linux.subsystem = 'pci'
linux.hotplug_type = 1 (0x1)
pci.subsys_product = 'Unknown (0x00b4)'
pci.subsys_vendor = 'Compaq Computer Corporation'
info.product = '82801CAM IDE U100'
pci.product = '82801CAM IDE U100'
info.vendor = 'Intel Corporation'
pci.vendor = 'Intel Corporation'
pci.device_protocol = 138 (0x8a)
pci.device_subclass = 1 (0x1)
pci.device_class = 1 (0x1)
pci.subsys_vendor_id = 3601 (0xe11)
pci.subsys_product_id = 180 (0xb4)
pci.vendor_id = 32902 (0x8086)
pci.product_id = 9354 (0x248a)
info.linux.driver = 'PIIX_IDE'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
info.parent = '/org/freedesktop/Hal/devices/computer'
info.bus = 'pci'
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
63: udi = '/org/freedesktop/Hal/devices/pci_8086_2485_alsa_capture_1'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2485_alsa_capture_1'
linux.device_file = '/dev/snd/pcmC0D1c'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'ALSA Capture Device'
alsa.type = 'capture'
alsa.card_id = 'I82801CAICH3'
alsa.device = 1 (0x1)
alsa.card = 0 (0x0)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2485'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2485'
alsa.device_file = '/dev/snd/pcmC0D1c'
info.capabilities = { 'alsa' }
info.category = 'alsa'
linux.sysfs_path = '/sys/class/sound/pcmC0D1c'
64: udi = '/org/freedesktop/Hal/devices/pci_8086_2485_oss_pcm_1'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2485_oss_pcm_1'
linux.device_file = '/dev/adsp'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'I82801CAICH3 OSS PCM Device'
oss.type = 'pcm'
oss.device = 1 (0x1)
oss.card_id = 'I82801CAICH3'
oss.card = 0 (0x0)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2485'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2485'
oss.device_file = '/dev/adsp'
info.capabilities = { 'oss' }
info.category = 'oss'
linux.sysfs_path = '/sys/class/sound/adsp'
65: udi = '/org/freedesktop/Hal/devices/pci_8086_2485_alsa_playback_0'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2485_alsa_playback_0'
linux.device_file = '/dev/snd/pcmC0D0p'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'ALSA Playback Device'
alsa.type = 'playback'
alsa.card_id = 'I82801CAICH3'
alsa.device = 0 (0x0)
alsa.card = 0 (0x0)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2485'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2485'
alsa.device_file = '/dev/snd/pcmC0D0p'
info.capabilities = { 'alsa' }
info.category = 'alsa'
linux.sysfs_path = '/sys/class/sound/pcmC0D0p'
66: udi = '/org/freedesktop/Hal/devices/pci_8086_2485_alsa_capture_0'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2485_alsa_capture_0'
linux.device_file = '/dev/snd/pcmC0D0c'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'ALSA Capture Device'
alsa.type = 'capture'
alsa.card_id = 'I82801CAICH3'
alsa.device = 0 (0x0)
alsa.card = 0 (0x0)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2485'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2485'
alsa.device_file = '/dev/snd/pcmC0D0c'
info.capabilities = { 'alsa' }
info.category = 'alsa'
linux.sysfs_path = '/sys/class/sound/pcmC0D0c'
67: udi = '/org/freedesktop/Hal/devices/pci_8086_2485_oss_pcm_0_0'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2485_oss_pcm_0_0'
linux.device_file = '/dev/dsp'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'I82801CAICH3 OSS PCM Device'
oss.type = 'pcm'
oss.device = 0 (0x0)
oss.card_id = 'I82801CAICH3'
oss.card = 0 (0x0)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2485'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2485'
oss.device_file = '/dev/dsp'
info.capabilities = { 'oss' }
info.category = 'oss'
linux.sysfs_path = '/sys/class/sound/dsp'
68: udi = '/org/freedesktop/Hal/devices/pci_8086_2485_oss_pcm_0'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2485_oss_pcm_0'
linux.device_file = '/dev/audio'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'I82801CAICH3 OSS PCM Device'
oss.type = 'pcm'
oss.device = 0 (0x0)
oss.card_id = 'I82801CAICH3'
oss.card = 0 (0x0)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2485'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2485'
oss.device_file = '/dev/audio'
info.capabilities = { 'oss' }
info.category = 'oss'
linux.sysfs_path = '/sys/class/sound/audio'
69: udi = '/org/freedesktop/Hal/devices/pci_8086_2485_alsa_control__1'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2485_alsa_control__1'
linux.device_file = '/dev/snd/controlC0'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'I82801CAICH3 ALSA Control Device'
alsa.card_id = 'I82801CAICH3'
alsa.type = 'control'
alsa.card = 0 (0x0)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2485'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2485'
alsa.device_file = '/dev/snd/controlC0'
info.capabilities = { 'alsa' }
info.category = 'alsa'
linux.sysfs_path = '/sys/class/sound/controlC0'
70: udi = '/org/freedesktop/Hal/devices/pci_8086_2485_oss_mixer__1'
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2485_oss_mixer__1'
linux.device_file = '/dev/mixer'
linux.subsystem = 'sound'
linux.hotplug_type = 2 (0x2)
info.product = 'I82801CAICH3 OSS Control Device'
oss.type = 'mixer'
oss.card_id = 'I82801CAICH3'
oss.card = 0 (0x0)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2485'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2485'
oss.device_file = '/dev/mixer'
info.capabilities = { 'oss' }
info.category = 'oss'
linux.sysfs_path = '/sys/class/sound/mixer'
71: udi = '/org/freedesktop/Hal/devices/pci_8086_2485'
info.udi = '/org |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 16.08.2006, 18:49 Uhr
|
|
Anmeldung: 25. Mar 2005
Beiträge: 2133
|
|
zu 2) DHCP funktioniert nicht, wenn der Rechner gleichzeitig über LAN und WLAN mit dem Router verbunden ist; das wollte ich ausschließen.
zu 4) Nach den Angaben zu ath0 hast du versucht, WPA statt WEP einzurichten. Das funktioniert nicht. Es geht auch besser, wenn du die ESSID mit eingibst (nicht "any").
zu 7) lspci hätt's auch getan. Es handelt sich um einen Atheros-Chipsatz => madwifi-modules*.deb aus dem Kernel-Paket. Aber bitte auf Besätigung durch slh warten. |
_________________
And I ain't got no worries 'cause I ain't in no hurry at all (Doobie Brothers, "Black Water").
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 16.08.2006, 20:19 Uhr
|
|
Anmeldung: 17. Dez 2003
Beiträge: 700
Wohnort: Berlin
|
|
Hi Murhagh,
starte mal den Rechner mit dem Parameter pci=nobios (einfach in Grub anhängen). Von 2.6.16 auf 2.6.17 ist die Behandlung von PCI/PCCARD geändert - bei fehlerhaftem Bios (was bei einigen Laptops der Fall ist) wird dann die Karte nicht mehr gefunden.
Siehe auch: http://bugzilla.kernel.org/show_bug.cgi?id=6801
Ciao Martin
P.S.: Was für'n Laptop hast Du? |
_________________
omnia vincit pecunia
Zuletzt bearbeitet von horo am 17.08.2006, 09:50 Uhr, insgesamt 2 Male bearbeitet
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 16.08.2006, 22:24 Uhr
|
|
Anmeldung: 16. Aug 2004
Beiträge: 1905
|
|
| Ja, Atheros/ madwifi ist der Treiber der Wahl, etwas schwieriger ist allerdings die Frage der Konfiguration - für WEP ist die WPA Konfiguration eher hinderlich, bei aktuellen wpa_supplicant Versionen sogar syntaktisch falsch (wiki). Allerdings hat madwifi durchaus auch Nachteile bei reinen WEP Netzen, da WPA dort besser getestet ist. |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 17.08.2006, 13:07 Uhr
|
|
Anmeldung: 14. Aug 2006
Beiträge: 14
Wohnort: Germany
|
|
Hmm, ich weiß nur, dass ich es über "KWiFi" probiert habe. Es ist definitiv nur ein WEP-Netz. In "KWiFi" habe ich auch die ESSID eingegeben. Welcher Weg ist der Beste zur Konfiguration der Karte?
Ich habe ein Compaq N410c mit aktuellstem BIOS. Müsste Version F.14 sein. Wie gesagt, WLAN-Karte ist eine Netgear WG511T. Ich werde den Eintrag gleich mal in grub ausprobieren.
Sorry Leute, bin noch etwas neu im Linux, aber wie installiere ich dann die *.deb Module?
¤dit:
Der Eintrag "pci=nobios" in grub hat mir leider "nur" die irda0-Schnittstelle erscheinen lassen. Immer noch kein ath0. Kann ich den Eintrag wieder entfernen? |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 17.08.2006, 13:17 Uhr
|
|
Anmeldung: 25. Mar 2005
Beiträge: 2133
|
|
|
Zitat:
Welcher Weg ist der Beste zur Konfiguration der Karte?
Als ein guter Weg hat sich das manuelle Starten von netcardconfig aus der Konsole erwiesen, weil man dann anhand der Textausgabe etwaige Fehler erkennen kann:
Konsole öffnen, dann
Code:
sux
netcardconfig
und die Karte aus der Liste mit Doppelklick auswählen.
Wichtig:
ESSID = Netzwerkname eingeben
Modus = Managed
WPA Unterstützung aktivieren = ja, wenn WPA gewollt; nein, wenn WEP oder gar keine Verschlüsselung gewollt
DHCP-Broadcast = ja
Ansonsten kannst du die Vorgaben des Scripts übernehmen. |
_________________
And I ain't got no worries 'cause I ain't in no hurry at all (Doobie Brothers, "Black Water").
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 17.08.2006, 13:24 Uhr
|
|
Anmeldung: 25. Mar 2005
Beiträge: 2133
|
|
Fehlende Pakete kannst du aus dem Verzeichnis kernel-current/ heraus mit
Code:
sux
dpkg -i mad*.deb
installieren.
Aber: Ich rate dringend, jetzt erst einmal einen Testlauf mit der Live-CD und netcardconfig zu machen. Sonst läuft das hier völlig aus dem Ruder. Am besten im Router Verschlüsselung deaktivieren, bei Verbindungserfolg dann mit WEP und dann mit WPA und neuem Kernel probieren. |
_________________
And I ain't got no worries 'cause I ain't in no hurry at all (Doobie Brothers, "Black Water").
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 17.08.2006, 13:35 Uhr
|
|
Anmeldung: 17. Dez 2003
Beiträge: 700
Wohnort: Berlin
|
|
|
Zitat:
¤dit:
Der Eintrag "pci=nobios" in grub hat mir leider "nur" die irda0-Schnittstelle erscheinen lassen. Immer noch kein ath0. Kann ich den Eintrag wieder entfernen?
Wenn der madwifi-Treiber noch nicht installiert ist, kannst Du das Modul auch nicht ansprechen. Damit erübrigt sich auch pci=... (In Deiner "ars magna" ^^^ hab ich mittlerweile auch die Karte gefunden).
Ciao Martin |
_________________
omnia vincit pecunia
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 17.08.2006, 13:38 Uhr
|
|
Anmeldung: 14. Aug 2006
Beiträge: 14
Wohnort: Germany
|
|
Ich probiere den Weg, den ockham23 vorgeschlagen hat.
madwifi ist installiert, aber in der "alten" Version 2.6.16. |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 17.08.2006, 13:39 Uhr
|
|
Anmeldung: 17. Dez 2003
Beiträge: 700
Wohnort: Berlin
|
|
|
Zitat:
madwifi ist installiert, aber in der "alten" Version 2.6.16.
Du brauchst _immer_ den passenden zum Kernel! |
_________________
omnia vincit pecunia
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 17.08.2006, 16:07 Uhr
|
|
Anmeldung: 14. Aug 2006
Beiträge: 14
Wohnort: Germany
|
|
Danke vielmals!!!! Es funktioniert!
Nachdem ich mit der LiveCD und ohne WEP-Verschlüsselung problemlos ins WLAN konnte, habe ich dann mal den Tipp von horo befolgt und das neue madwifi-Modul installiert. Währenddessen habe ich auch wieder die WEP-Verschlüsselung angeschaltet. Jetzt kann ich nach der Konfiguration mit "netcardconfig" mit WEP ins WLAN.
Noch eine Frage: Ist KWiFi eine gute Applikation um mehrere WLANs zu verwalten oder merkt sich das Notebook die einzelnen WLAN-Einstellungen auch über die bash? |
|
|
| |
|
|
|
|
|
|
