23.08.2014, 19:26 UhrDeutsch | English
Hallo Gast [ Registrierung | Anmelden ]

Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
Autor Nachricht
rossi
Titel: Failure to Boot Using Kanotix  BeitragVerfasst am: 12.06.2006, 19:28 Uhr



Anmeldung: 12. Jun 2006
Beiträge: 20

Hello:

I have a computer with the following hardware: Intel Pentium D 930+ 3.0 GHz Dual Core with EM64T support.

I obtain the following error with the Kanotix cd-rom:

BIOS Bug, no explicit IRQ entries, using default mptable (tell york vendor)

Accessing Kanotix CDROM at /dev/hda ...

PCI: Failed to allocate mem resource. #6:20000@e0000000 for 0000:01:00.0
ata1 disabling port

Other information:
1) Knoppix boots on this machine.
2) Kanotix boots in failsafe mode on this machine
3) Before it hangs, I get one penguin indicating that it doesn't recognize the two processors.
4) The Kanotix CDROM boots three other PCs including an IBM ThinkPad Model T41.

Can you please help me to fix this problem?

Thank you for your help.

Regards,

Angelo Traurig Traurig
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
schnorrer
Titel: Failure to Boot Using Kanotix  BeitragVerfasst am: 12.06.2006, 20:19 Uhr



Anmeldung: 09. Jan 2006
Beiträge: 1721

It is realy a BIOS-Bug with the DUAL-Core EMT64

Make a BIOS-Upgrade with the latest BIOS from your Mainboard-Vendor.
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
michael7
Titel:   BeitragVerfasst am: 13.06.2006, 17:40 Uhr



Anmeldung: 24. Mai 2005
Beiträge: 354
Wohnort: Nashville
rossi,

For what it's worth, I have an AMD64 dual core box with an ASUS motherboard and Kanotix runs fine on it. My install is the easter-rc4 release, dist-upgraded regularly, with the 2.6.16.16-kanotix-1 kernel. Which kernel are you using?

michael

_________________
Debian Social Contract
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
rossi
Titel:   BeitragVerfasst am: 13.06.2006, 18:33 Uhr



Anmeldung: 12. Jun 2006
Beiträge: 20

Hello Michael:

I am using the default kernel which you obtain when you click on "Downloads" on the main splash page (http://kanotix.com/Downloads-req-viewdownload-cid-1.html) and then download "KANOTIX-2005-04.iso for a cd burn image.

Last night I installed Kanotix successfully on my IBM T41 ThinkPad, performed a dist-upgrade and lost the xserver. I had great hopes for Kanotix. but this is really drugery.

Regards,

Angelo
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
kstevek
Titel:   BeitragVerfasst am: 13.06.2006, 18:48 Uhr



Anmeldung: 26. Jan 2006
Beiträge: 37

hi rossi,

much has changed since 2005-04 mainly with xorg and it seems a dist upgrade from a newly installed 2005-04 is too much for the system to cope with. my advice would be to download the 2006-easter-rc4 iso and install then dist upgrade from there.

cheers kstevek.

(kanotix is well worth it by the way)


<edit>should have posted this answer in yer other thread, good luck anyhow.

_________________
Skip built box, AMD Athlon XP1700,Jetway mobo (no sensors), geforce2 mx400, 512m ram, wireless.
running Kanotix Easter edition, xorg7, kernel 2.6.18.5-slh-up-1, beryl enhanced kde boing boing!
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
rossi
Titel:   BeitragVerfasst am: 20.06.2006, 15:17 Uhr



Anmeldung: 12. Jun 2006
Beiträge: 20

Hello:

I have three identical machines (described below) one of them has Knoppix 5.0 installed, and the other two have kanotix-2006-easter-rc4 installed.

All three installations were successful, and I get a message to this effect. The Kanotix installs give some errors, but it goes by so fast, I can't trap it.

Following shutdown, the Knoppix install boots from hard drive, but the Kanotix installs seem to the ignore the hard drive and does not boot.

I could mount the interactive Kanotix CD, mount /dev/sda1 and look for errors, but I am not sure where to look.

Machines x 3
==========
Infinity DX220A-LM
• Intel Pentium D 930(New Model)3.0GHz Dual Core 64Bit 2MBx2 4MB Cache
LGA775 CPU
• Intel D955XBK ATX MB Intel D955X Chipset 800 FSB
• 4.0GB DDR2 533 Dual Channel Memory(4 x 1.0GB Generic Brand); 1.44 floppy
drive;
• 16xDVD ROM + 16x16 DVD R/RW Burner; No Flash Memory Card Reader
• Seagate 500GB 7200RPM SATA-II 16MB Chache Hard Disk
• Dual 10/100/1000 LAN
• 8 x USB 2.0 Ports and IEEE1394 Port
• High Definition 8 Channel Audio Dolby 7.1
• Asus EN6600 nVIDIA GeForce 6600 256MB PCI Express 16x VGA Card
• 2 DVI-I, S-Video/Composite TV Out
• In-Win Mid Tower Case with 450W Quiet Power Supply
• Microsoft Keyboard and Optical Mouse combo

BIOS UPDATE
===========
I updated the BIOS to the latest/greatest version of May 27, 2006.

Disk Partitioning
============
Primary partition: /dev/sda1 ~490 GBytes
Linux Swap Partition /dev/sda5 ~ 2 GBytes

Could someone help me with this?

Thanks so much.

Kind regards,

Angelo
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
schnorrer
Titel:   BeitragVerfasst am: 20.06.2006, 20:58 Uhr



Anmeldung: 09. Jan 2006
Beiträge: 1721

Hi Angelo,

I had troubles with a seagate Pata 300GB, where kanotix wouldn't install too. After changeing the drive against a WD 310GB the install works perfect.

My be your seagate is the fault, not bios not kanotix not kernel. Can also a bios-stetting with the sata and raid setting.
Last time I used Knoppix 4.01 does fail instalation while kanotix installs.

This let me think kanotix and knoppix have added different ide-drivers. Or does knoppix even fail?
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
rossi
Titel:   BeitragVerfasst am: 20.06.2006, 20:59 Uhr



Anmeldung: 12. Jun 2006
Beiträge: 20

Hello:

I found the the problem. Actually, this problem was answered indirectly elsewhere in this forum. The partition was not marked bootable!

1) I used the Kanotix interactive CD.
2) cfdisk /dev/sda
3) toggled on "bootable" for /dev/sda2 and that was it!
4) Both systems now boot just fine.

Best regards,

Angelo
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
schnorrer
Titel:   BeitragVerfasst am: 20.06.2006, 21:18 Uhr



Anmeldung: 09. Jan 2006
Beiträge: 1721

Normaly the partition-tool does it for the first Partition if its a primary. Why this was not done, writecache has the data to write, but told the tool beeing ready. In Fact the tool shuts down the process and the cache got lost.

Can happen with all OS's.
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Beiträge vom vorherigen Thema anzeigen:     
Gehe zu:  
Alle Zeiten sind GMT + 1 Stunde
Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
PNphpBB2 © 2003-2007 
 
Deutsch | English
Logos and trademarks are the property of their respective owners, comments are property of their posters, the rest is © 2004 - 2006 by Jörg Schirottke (Kano).
Consult Impressum and Legal Terms for details. Kanotix is Free Software released under the GNU/GPL license.
This CMS is powered by PostNuke, all themes used at this site are released under the GNU/GPL license. designed and hosted by w3you. Our web server is running on Kanotix64-2006.