| Autor |
Nachricht |
|
|
Titel: dual-monitor support
 Verfasst am: 15.07.2006, 08:20 Uhr
|
|
Anmeldung: 18. Jul 2005
Beiträge: 293
Wohnort: EST US
|
|
Hi, I need help to set up two monitors to the same computer. Is there a how-to?
I've been messing around with the xorg.conf and in live-mode with XF86Config-4 in live mode and I've been enable to do it, but I think I messed up the xorg.conf from the installed kanotix.
I've tried mkxf86config and it only detects one monitor
I figure out that out of the box, the two monitors are cloned, but running fireglcontrolpanel as root do the trick. however, I know the modelines are wrong since I played with the config files.
Also, the two monitors are diff brand, so they have diff resolution.
I tried KDE's "Screen resize & rotate" but I can't give diff resolutions. it can only modify as a whole display.
I'd like to have the HP to 1280x1024 and the Acer 1440x990
This is my edited configuration. is there any command/script that can detect and conf both monitors?
Code:
# Auto-generated by KNOPPIX mkxf86config
#---------------------------------------
Section "ServerLayout"
#Screen 2 "ACER" LeftOf "HPS"
# PS/2 Mouse not detected
# Serial Mouse not detected
# ALPS TouchPad not detected
# Synaptics TouchPad not detected
Identifier "XFree86 Configured"
Screen 1 "HPS" RightOf "ACERS"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
# Load "GLcore"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
# Load "extmod"
SubSection "extmod"
Option "omit xorg-dga"
EndSubSection
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
# TouchPad not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "ALPS TouchPad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.2"
Option "MaxSpeed" "0.5"
Option "AccelFactor" "0.01"
Option "EdgeMotionMinSpeed" "15"
Option "EdgeMotionMaxSpeed" "15"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
EndSection
Section "InputDevice"
Identifier "Synaptics TouchPad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
# DDC-probed
# DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
Identifier "ACERM"
VendorName "ACR"
ModelName "ACRad52"
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 31.5 640 656 696 816 480 481 484 504 -hsync -vsync
ModeLine "640x480" 25.2 640 648 744 784 480 482 484 509 -hsync -vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x600" 49.0 1024 1064 1168 1312 600 601 604 622 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x768" 80.1 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
ModeLine "1280x800" 83.5 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1368x768" 85.9 1368 1440 1584 1800 768 769 772 795 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1440x900" 106.5 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
ModeLine "1440x1050" 126.3 1440 1536 1688 1936 1050 1051 1054 1087 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
ModeLine "1680x1050" 147.1 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
ModeLine "1920x1200" 193.2 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
Option "DPMS" "true"
EndSection
Section "Monitor"
# DDC-probed
# DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
# 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
# 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
# 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
# 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01
# 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
# 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
# 1024x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 48.96 MHz
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
# 1280x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 80.14 MHz
# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
# 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
# 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
# 1440x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 126.27 MHz
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
# 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 193.16 MHz
Identifier "HPM"
VendorName "HWP"
ModelName "HWP05db"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 120.0
Option "DPMS" "true"
EndSection
Section "Device"
Option "RenderAccel" "1"
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
# The following line is auto-generated by KNOPPIX mkxf86config
# BusID "PCI:1:0:0"
Identifier "Card0"
Driver "fglrx"
VendorName "All"
BoardName "All"
### Available Driver options are:-
Option "UseInternalAGPGART" "no"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "MonitorLayout" "AUTO, AUTO"
Option "DesktopSetup" "horizontal,reverse"
EndSection
Section "Screen"
Identifier "ACERS"
Device "Card0"
Monitor "ACERM"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "HPS"
Device "Card0"
Monitor "HPM"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
# Option "Composite" "1"
# Option "RENDER" "1"
EndSection
PS: I tried #X -configure and I got this error in both live-mode and install
Code:
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Backtrace:
0: X(xf86SigHandler+0x88) [0x80b8d98]
1: [0xffffe420]
2: X(xf86memcpy+0x2b) [0x80e8c3b]
3: /usr/lib/xorg/modules/drivers/fglrx_drv.so(R200Probe+0x121) [0xb75d4f81]
4: X(DoConfigure+0x13f) [0x80ab44f]
5: X(InitOutput+0x615) [0x80a10c5]
6: X(main+0x293) [0x806e133]
7: /lib/tls/libc.so.6(__libc_start_main+0xd0) [0xb7d7eeb0]
8: X(FontFileCompleteXLFD+0x91) [0x806d881]
Fatal server error:
Caught signal 11. Server aborting
Aborted
So my questions are: Is there a how-to to detect both monitors, create a xorg.conf, and set each monitor with diff resolitions? |
|
|
| |
|
|
|
 |
|
|
|
Titel: dual-monitor support
Verfasst am: 15.07.2006, 11:22 Uhr
|
|
Anmeldung: 09. Jan 2006
Beiträge: 1720
|
|
What you have missed, you have definied 2 Monitors with the same Name SCREEN and not screen0, screen 2.
Same with MONITOR only 1 Type MONITOR. Should have Section Monitor 0 /and Section Monitor 2.
#### is at the wrong place
#Screen 2 "ACER" LeftOf "HPS" #### wrong setting too early declared
# PS/2 Mouse not detected
# Serial Mouse not detected
# ALPS TouchPad not detected
# Synaptics TouchPad not detected
Identifier "XFree86 Configured"
Screen 1 "HPS" RightOf "ACERS"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
The rest for the serlayout section is not correct. following shows the right one.
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0 ## define srceen1 left and points to Section monitor0
Screen 1 "Screen1" 0 0 ## define screen2 right and point to Section monitor1
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
# ALPS TouchPad not detected
# Synaptics TouchPad not detected
EndSection
Section "Monitor"
# DDC-probed
# DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
Identifier "ACERM"
VendorName "ACR"
ModelName "ACRad52"
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0
## snip til end section
Section "Monitor" #### double dedined
# DDC-probed
# DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
#### snip til End section |
|
|
| |
|
|
|
|
|
|
|
Titel: Re: dual-monitor support
Verfasst am: 15.07.2006, 16:11 Uhr
|
|
Anmeldung: 18. Jul 2005
Beiträge: 293
Wohnort: EST US
|
|
Hi schnorrer
schnorrer hat folgendes geschrieben::
#### is at the wrong place
#Screen 2 "ACER" LeftOf "HPS" #### wrong setting too early declared
# PS/2 Mouse not detected
Doesn't the # means comment? if so, it's not set too early declared since is commented out. isn't that right? |
|
|
| |
|
|
|
|
|
|
|
Titel: RE: Re: dual-monitor support
Verfasst am: 15.07.2006, 18:51 Uhr
|
|
Anmeldung: 09. Jan 2006
Beiträge: 1720
|
|
#Label ### is no comment
# label ### is a comment
Have you seen the other sections Monitor Missing the Number and section Screen also missing the Number? |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 16.07.2006, 04:34 Uhr
|
|
Anmeldung: 18. Jul 2005
Beiträge: 293
Wohnort: EST US
|
|
ahh, I see. Thank you for the clarification. I got it working now. I used a fresh xorg.conf and fireglconfig did all. Just for the record, here's the new file
Code:
# Auto-generated by KNOPPIX mkxf86config
Section "ServerLayout"
# PS/2 Mouse not detected
# Serial Mouse not detected
# ALPS TouchPad not detected
# Synaptics TouchPad not detected
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
# Load "GLcore"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
# Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
# TouchPad not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "7"
EndSection
Section "InputDevice"
Identifier "ALPS TouchPad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.2"
Option "MaxSpeed" "0.5"
Option "AccelFactor" "0.01"
Option "EdgeMotionMinSpeed" "15"
Option "EdgeMotionMaxSpeed" "15"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
EndSection
Section "InputDevice"
Identifier "Synaptics TouchPad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
# DDC-probed
# DDC-probed
# These are the DDC-probed settings reported by your monitor.
# 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
# 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
# 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
# 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
# 640x480, 85.0Hz; hfreq=43.27, vfreq=85.01
# 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
# 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
# 1024x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 48.96 MHz
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
# 1280x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 80.14 MHz
# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
# 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
# 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
# 1440x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 126.27 MHz
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
# 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 193.16 MHz
Identifier "Monitor0"
VendorName "HWP"
ModelName "HWP05db"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 120.0
Option "DPMS" "true"
EndSection
Section "Device"
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
# The following line is auto-generated by KNOPPIX mkxf86config
# BusID "PCI:1:0:0"
Identifier "Card0"
Driver "fglrx"
VendorName "All"
BoardName "All"
Option "RenderAccel" "1"
### Available Driver options are:-
Option "UseInternalAGPGART" "no"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "MonitorLayout" "AUTO, AUTO"
Option "DesktopSetup" "horizontal,reverse"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1440x900" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Thank you for your guide |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 16.07.2006, 06:11 Uhr
|
|
Anmeldung: 18. Jul 2005
Beiträge: 293
Wohnort: EST US
|
|
K. Desktops works as they should. I can maximize windows in each monitors. Set up wallpapers, etc.
However, I can only watch video in one monitor. I can even go full screen in that same. The problem is that I can't watch any video in the other. It's only show part of the video or just a big black screen in the other. If I put the player in the middle of both monitor I can see half of the video in one monitor and nothing in the other half.
I wish at least that I can watch video in the other monitor. You see, the one I currently can watch video is a CRT 4:3 monitor, and the other one is a 16:10 (widescreen) LCD monitor, so that monitor is meant to watch movies in it. I tried to modify Kaffeine and totem configuration and I can't find anything. Any idea how to fix this?
Thanks |
|
|
| |
|
|
|
|
|
|
|
|
|
|
