| Autor |
Nachricht |
|
|
Titel:
 Verfasst am: 29.09.2006, 17:09 Uhr
|
|
Anmeldung: 04. Apr 2006
Beiträge: 38
Wohnort: Friuli, NE Italy
|
|
| I can confirm the bug also on my laptop with x700. Other versions worked fine |
|
|
| |
|
|
|
 |
|
|
|
Titel:
Verfasst am: 01.10.2006, 19:58 Uhr
|
|
Anmeldung: 11. Feb 2005
Beiträge: 32
|
|
apparently 2006-1RC3 dooes not recognize the VIA CLE266 video chipset. iow the via kernel module (modprobe via manually) doesn't load and consequently the DRM module which leaves the vesa driver for X.
lspci output follows
00:00.0 0600: 1106:3123
Subsystem: 1106:aa01
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
screws up DRI and mpeg deciding under X too |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 01.10.2006, 21:12 Uhr
|
|
Anmeldung: 17. Dez 2003
Beiträge: 16785
|
|
| use xmodule=via with rc4 tomorrow. |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 01.10.2006, 21:15 Uhr
|
|
Anmeldung: 22. Jan 2006
Beiträge: 448
Wohnort: Dresden
|
|
| Oh the RC4 comes tomorrow! Nice! |
_________________
Scanmetender[Soft] - Tender security solutions for your computer.
Scanmetender Standard - It is free! For GNU/Linux and Windows(R).
http://www.scanmetender.com
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 02.10.2006, 02:19 Uhr
|
|
Anmeldung: 08. Dez 2005
Beiträge: 300
|
|
Can't wait! Hopefully will be muuuuuch better  |
|
|
| |
|
|
|
|
|
|
|
Titel:
Verfasst am: 11.10.2006, 06:58 Uhr
|
|
Anmeldung: 11. Okt 2006
Beiträge: 1
|
|
Regarding this previous post:
gs hat folgendes geschrieben::
Problem booting RC3 from hd-install on usb-harddisk: There was no problem installing Kanotix-2006-01-RC3 on my usb-harddisk, but inspite doing the procedure decribed in the FAQ which modified mkinitrd etc. RC3 does not boot from the usb-disk: "kernel panic - not syncing: VFS unable to mount root fs on unknown block (0,0)"
Including KanoEaster I was always able to boot Kanotix from usb-disks - is this a bug in RC3 or a feature?
Poormans-install on sda using cheatcodes "tohd=/dev/sda5 bootusb2" does work, however.
I wrestled with the same thing using RC4 this past weekend. I followed the suggestions in the FAQ and ended up in the same place. After poking around for way too long, I modified mkinitrd.conf to change
ROOT=prompt
to
ROOT=''
This seems to have been the trick. I no longer get error messages about missing modules "sg" and "sd_mod" during mkinitrd and no more kernel panics, either. |
|
|
| |
|
|
|
|
|
|
|
Titel: pstk rstk error while installing Ubuntu through a CD
Verfasst am: 05.12.2006, 05:51 Uhr
|
|
Anmeldung: 05. Dez 2006
Beiträge: 1
|
|
|
jk hat folgendes geschrieben::
When booting CD(RC1 and RC3) on Dell Latitude D505 I get this text in the upper left corner. I see the graphical background with the bottom and right cut off. The 30 second count down does not start until I hit a key. If I try to hit another key it dumps me into a text mode grub menu. I can select an option and it boots OK. lspci shows 00:02.0 VGA compatible controller: Intel Corporation 82852/828
55 GM/GME/PM/GMV Processor to I/O Controller (rev 02).
Code:
/----pstk------------rstk-------\
| : | : |
| : | : |
| : | : |
| 0: 60a36. a | : |
| 1: 609fe. a | : |
| 2: 2c9a0. 4 | : |
| 3: 147. 9 | 0: fffffff. 5 |
| a: a. 1 | 1: 1467. 5 |
|-------------------------------|
|err 8 |
|ip 23ac: 1a. 7 |
\-------------------------------/
I get the same problem as above. Request you to help me in resolving the problem.
I am trying to install this on a COMPAQ presario x1000 laptop with 80GB hdd and 512 mb ram.
Harish |
|
|
| |
|
|
|
|
|
|
