27.11.2014, 03:02 UhrDeutsch | English
Hallo Gast [ Registrierung | Anmelden ]

Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
Autor Nachricht
jesudia
Titel: kanotix to usb-stick  BeitragVerfasst am: 26.09.2007, 16:10 Uhr



Anmeldung: 09. Mar 2007
Beiträge: 6

I have problems for install kanotix on a usb-stick of 2 gigas because the instalation is not complete some directories are emptly, can you tell me what can i do.
following instructs from:

http://kanotix.com/FAQ-myfaq-yes-id_cat-63.html#q321


How can you install KANOTIX on a USB-HD?



To do an installation of KANOTIX on a USB Harddisk, compared to a normal HD-Install you need to take some extra steps.

We start with a normal installationand choose the partition on the USB disk, where KANOTIX is to be installed.
(we speak of "sda1" here, but this is valid for any other partition on the USB disk).

The following changes then have to be made as root:

# mount /dev/sda1 /media/sda1

# mount --bind /proc /media/sda1/proc

# chroot /media/sda1


# echo ehci-hcd >> /etc/mkinitrd/modules
echo libusual >> /etc/mkinitrd/modules # not for 2005-04
# echo usb-storage >> /etc/mkinitrd/modules



In the file: etc/mkinitrd/mkinitrd.conf the value of the variable DELAY has to be set to 10 with the command:

# perl -pi -e 's/^(DELAY)=.*/\1=10/' /etc/mkinitrd/mkinitrd.conf


Starting with KANOTIX 2005-04 you also have to do:

# perl -pi -e 's/mkext2fs/mkcramfs/' /etc/mkinitrd/mkinitrd.conf





We now create a new initrd image:

# mkinitrd -o /boot/initrd.img-$(uname -r)


(Errors about missing modules can be ignored)


The file /boot/grub/menu.lst must be adapted. Therefore we look at the file:

# cat /boot/grub/device.map

(hd0) /dev/hda
(hd1) /dev/sda

and issue the following commands to make a needed change in menu.lst and add the right harddisk:

# perl -pi -e 's/hd1/hdX/' /boot/grub/menu.lst

# perl -pi -e 's/hd0/hd1/' /boot/grub/menu.lst

# perl -pi -e 's/hdX/hd0/' /boot/grub/menu.lst
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
merlin
Titel: kanotix to usb-stick  BeitragVerfasst am: 26.09.2007, 16:19 Uhr



Anmeldung: 28. Feb 2005
Beiträge: 1112
Wohnort: Camelot
The script

http://kanotix.acritox.de/kanotix-usb-stick.bash

can do that for you
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
gs
Titel: kanotix to usb-stick  BeitragVerfasst am: 26.09.2007, 21:15 Uhr



Anmeldung: 06. Jan 2005
Beiträge: 632

you tried to install Kanotix, which is about 2.3 GB after install, to a 2 GB-stick
this is impossible, since the space on the stick is not sufficient. A 4GB Stick does work.

you can install the latest KanotixThorhammerRC6 also to an external usb-drive, if you can create a partition there greater than about 2.4GB, better 4-5. The procedure you mentioned from the FAQ is no more necessary - Kanotix installed on a partition of an external usb-drive boots without additional hacking

with the above scrip you can install the livecd to a stick - this only needs 702 MB
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
jesudia
Titel:   BeitragVerfasst am: 05.10.2007, 17:40 Uhr



Anmeldung: 09. Mar 2007
Beiträge: 6

My solution has been tinyflux, thanks
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Zolfo
Titel:   BeitragVerfasst am: 23.12.2007, 14:06 Uhr



Anmeldung: 19. Dez 2007
Beiträge: 2

Do I have the same "autoconfiguring device" part of the livecd with an hd-installation?
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
ockham23
Titel:   BeitragVerfasst am: 23.12.2007, 14:58 Uhr



Anmeldung: 25. Mar 2005
Beiträge: 2108

Some parts of the hardware are autodetected on each boot, but other parts are not. For instance, /etc/X11/xorg.conf contains settings for keyboard, mouse and graphics driver. You would have to edit this file to have the correct settings for each computer.

If you want a Kanotix LiveCD with your favorite software added to it, you have to get a 1 GB thumb drive, copy the iso file to it and install grub in the MBR of the thumb drive. Then you can boot off the thumb drive with cheat code fromiso. Kano included a script that looks for a folder /deb and installs the packages from this folder.

_________________
And I ain't got no worries 'cause I ain't in no hurry at all (Doobie Brothers, "Black Water").
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Beiträge vom vorherigen Thema anzeigen:     
Gehe zu:  
Alle Zeiten sind GMT + 1 Stunde
Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
PNphpBB2 © 2003-2007 
 
Deutsch | English
Logos and trademarks are the property of their respective owners, comments are property of their posters, the rest is © 2004 - 2006 by Jörg Schirottke (Kano).
Consult Impressum and Legal Terms for details. Kanotix is Free Software released under the GNU/GPL license.
This CMS is powered by PostNuke, all themes used at this site are released under the GNU/GPL license. designed and hosted by w3you. Our web server is running on Kanotix64-2006.