#!/bin/bash # Basic system configuration and hardware setup # (C) Klaus Knopper 2004 # (C) 2003-2006 Joerg Schirottke # (C) 2005-2006 Stefan Lippers-Hollmann # (C) 2007 Kel Modderman PATH="/bin:/sbin:/usr/bin:/usr/sbin" export PATH umask 022 # override tool behaviour through distro-defaults FLL_DISTRO_MODE="installed" FLL_IMAGE_DIR="SIDUX" FLL_DISTRO_NAME="sidux" FLL_MOUNTPOINT="/SIDUX" FLL_LIVE_USER="sidux" FLL_PERSISTENT_HOME="sidux.img" FLL_WALLPAPER="/usr/share/wallpapers/sidux.jpg" X_CONF="/etc/X11/xorg.conf" [ -r /etc/default/distro ] && . /etc/default/distro [ ! "$FLL_DISTRO_MODE" = "live" ] && exit 0 [ -z "$FLL_MOUNTPOINT" ] && FLL_MOUNTPOINT="/$FLL_IMAGE_DIR" # make sure live-user is owner of their /home chown "$FLL_LIVE_USER":"$FLL_LIVE_USER" /home/"$FLL_LIVE_USER" case "$1" in start) ;; stop) ;; restart|force-reload) ;; esac # Ignore these signals: INT, TERM, SEGV trap "" 2 3 11 ############################################################################### # ANSI COLORS ############################################################################### CRE=" " NORMAL="" # RED: Failure or error message RED="" # GREEN: Success message GREEN="" # YELLOW: Descriptions YELLOW="" # BLUE: System messages BLUE="" # MAGENTA: Found devices or drivers MAGENTA="" # CYAN: Questions CYAN="" # BOLD WHITE: Hint WHITE="" # get rid of these as soon as possible HWSETUP_MAIN="/etc/sysconfig/knoppix" HWSETUP_MOUSE="/etc/sysconfig/mouse" HWSETUP_DESKTOP="/etc/sysconfig/desktop" ############################################################################### # utility Functions ############################################################################### # Simple shell grep stringinfile() { case "$(cat $2)" in *$1*) return 0 ;; esac return 1 } # same for strings stringinstring() { case "$2" in *$1*) return 0 ;; esac return 1 } # Reread boot command line; echo last parameter's argument or return false. getbootparam() { stringinstring " $1=" "$CMDLINE" || return 1 result="${CMDLINE##*$1=}" result="${result%%[ ]*}" echo "$result" return 0 } # Check boot commandline for specified option checkbootparam() { stringinstring " $1" "$CMDLINE" return "$?" } start_service() { if [ -x /etc/init.d/$1 ]; then if [ -n "$2" ]; then RUNLEVEL="$2" /etc/init.d/$1 start else /etc/init.d/$1 start fi return $? fi return 1 } splash_progress() { # be sure we are non-blocking if [ -p /etc/splashy/splashy.fifo ]; then (echo "progress $1" > /etc/splashy/splashy.fifo) & fi } ### EOF utility functions ############################################################################### # mount critical virtual filesystems ############################################################################### start_service mountkernfs.sh # Read in boot parameters [ -z "$CMDLINE" ] && CMDLINE=" $(< /proc/cmdline)" ############################################################################### # CD Checker ############################################################################### if checkbootparam "testcd" || checkbootparam "testdvd"; then echo " ${BLUE}Checking CD data integrity as requested by '${CYAN}testcd${BLUE}' boot option.${NORMAL}" echo " ${BLUE}Reading files and checking against ${FLL_IMAGE_DIR}/md5sums, this may take a while...${NORMAL}" echo -n "${RED}" ( cd /cdrom/ ; rm -f /tmp/md5sum.log ; LANG=C md5sum -c ${FLL_IMAGE_DIR}/md5sums 2>&1 | tee /tmp/md5sum.log ) if [ "$?" = "0" ]; then echo " ${GREEN}Everything looks OK${NORMAL}" else echo "${RED} *** CHECKSUM FAILED FOR THESE FILES: ***" egrep -v '(^md5sum:|OK$)' /tmp/md5sum.log echo "${RED} *** DATA ON YOUR CD MEDIUM IS POSSIBLY INCOMPLETE OR DAMAGED, ***${NORMAL}" echo "${RED} *** OR YOUR COMPUTER HAS BAD RAM. ***${NORMAL}" echo -n "${CYAN}Hit return to contine, or press the reset button to quit.${NORMAL} " read a fi fi ############################################################################### # Check if we are in interactive startup mode ############################################################################### INTERACTIVE="" stringinstring "BOOT_IMAGE=expert" "$CMDLINE" && INTERACTIVE="yes" ############################################################################### # Check if we want the config floppy ############################################################################### MYCONF="" case "$CMDLINE" in *\ myconf*|*\ floppyconf*|*\ custom*|*\ config*) MYCONF="yes" ;; esac if [ -n "$MYCONF" ]; then # Check for given config directory MYCONFDIR="$(getbootparam 'myconfig')" [ -n "$MYCONFDIR" ] || MYCONFDIR="$(getbootparam 'myconf')" [ -n "$MYCONFDIR" ] || MYCONFDIR="$(getbootparam 'floppyconfig')" [ -n "$MYCONFDIR" ] || MYCONFDIR="$(getbootparam 'floppyconf')" [ -n "$MYCONFDIR" ] || MYCONFDIR="$(getbootparam 'custom')" [ -n "$MYCONFDIR" ] || MYCONFDIR="$(getbootparam 'config')" fi ############################################################################### # set hostname ############################################################################### HOSTNAME="$(getbootparam 'hostname' 2>/dev/null)" if [ -n "$HOSTNAME" ]; then rm -f /etc/hostname /etc/mailname echo "$HOSTNAME" > /etc/hostname echo "$HOSTNAME" > /etc/mailname # update /etc/hosts sed -i '/localhost/!s/^\(127.0.0.1[ \t]\+\)\(.\+\)$/\1'"$HOSTNAME"'/' /etc/hosts fi start_service hostname.sh ############################################################################### # localization ############################################################################### # Allow language specification via commandline. The default language # will be overridden via "lang=de" boot commandline LANGUAGE="$(getbootparam lang 2>/dev/null)" [ -n "$LANGUAGE" ] || LANGUAGE="en" # The default language/keyboard to use. This CANNOT be autoprobed. # Most of these variables will be used to generate the KDE defaults case "$LANGUAGE" in de-utf8|de) # German version UTF-8 #LANGUAGE="de_DE:de" LANG="de_DE.UTF-8" KEYTABLE="de-latin1-nodeadkeys" KDEKEYBOARDS="de,us" XKBLAYOUT="de" TZ="Europe/Berlin" CD_COUNTRY="German" ;; au-utf8|au) ## Australian version #LANGUAGE="en_AU:en" LANG="en_AU.UTF-8" KEYTABLE="us" KDEKEYBOARDS="us" XKBLAYOUT="us" TZ="Australia/Sydney" CD_COUNTRY="us_american" ;; be-utf8|be) ## Belgian version #LANGUAGE="be_BY:be" LANG="be_BY.UTF-8" KEYTABLE="be2-latin1" KDEKEYBOARDS="be,fr,us" XKBLAYOUT="be" TZ="Europe/Brussels" CD_COUNTRY="Belgian" ;; bg-utf8|bg) ## Bulgarian version #LANGUAGE="bg_BG:bg" LANG="bg_BG.UTF-8" KEYTABLE="bg" KDEKEYBOARDS="bg,us" XKBLAYOUT="bg" TZ="Europe/Sofia" CD_COUNTRY="Bulgarian" ;; br-utf8|br) ## Brazilian Version #LANGUAGE="pt_BR:pt" LANG="pt_BR.UTF-8" KEYTABLE="br-abnt2" KDEKEYBOARDS="br,us" XKBLAYOUT="br" TZ="America/Sao_Paulo" CD_COUNTRY="Brazilian" ;; ch-utf8|ch) ## Swiss version (basically de with some modifications) #LANGUAGE="de_CH:de" LANG="de_CH.UTF-8" KEYTABLE="sg-latin1" KDEKEYBOARDS="de_CH,de,fr,us" XKBLAYOUT="de" TZ="Europe/Zurich" CD_COUNTRY="Swiss-de" ;; cn-utf8|cn) ## Simplified Chinese version LANG="zh_CN.UTF-8" KEYTABLE="us" KDEKEYBOARDS="us" XKBLAYOUT="us" TZ="Asia/Shanghai" CD_COUNTRY="" ;; cs-utf8|cz-utf8|cs|cz) ## Czech version #LANGUAGE="cs_CZ:cs" LANG="cs_CZ.UTF-8" KEYTABLE="cz-lat2" KDEKEYBOARDS="cs,us" XKBLAYOUT="cs" TZ="Europe/Prague" CD_COUNTRY="Czech-qwerty" ;; dk-utf8|da-utf8|dk|da) ## Dansk version LANG="da_DK.UTF-8" KEYTABLE="dk" KDEKEYBOARDS="dk,us" XKBLAYOUT="dk" TZ="Europe/Copenhagen" CD_COUNTRY="Danish" ;; el-utf8|el) ## Greek version #LANGUAGE="el_GR:el" LANG="el_GR.UTF-8" KEYTABLE="gr" KDEKEYBOARDS="gr,us" XKBLAYOUT="gr" TZ="Europe/Athens" CD_COUNTRY="Greek" ;; es-utf8|es) ## Spanish version #LANGUAGE="es_ES:es" LANG="es_ES.UTF-8" KEYTABLE="es" KDEKEYBOARDS="es,us" XKBLAYOUT="es" TZ="Europe/Madrid" CD_COUNTRY="Spanish" ;; fi-utf8|fi) ## Finnish version, though we may not have the kde-i18n files #LANGUAGE="fi_FI:fi" LANG="fi_FI.UTF-8" KEYTABLE="fi-latin1" KDEKEYBOARDS="fi,us" XKBLAYOUT="fi" TZ="Europe/Helsinki" CD_COUNTRY="Swedish" ;; fr-utf8|fr) ## French version #LANGUAGE="fr_FR" LANG="fr_FR.UTF-8" KEYTABLE="fr" KDEKEYBOARDS="fr,us" XKBLAYOUT="fr" TZ="Europe/Paris" CD_COUNTRY="French" ;; ga-utf8|ga) ## Irish Gaeilge version LANG="ga_IE.UTF-8" KEYTABLE="uk" KDEKYBOARDS="ie" XKBLAYOUT="ie" TZ="Europe/Dublin" CD_COUNTRY="British" ;; he-utf8|il-utf8|he|il) ## Hebrew version #LANGUAGE="he_IL:he" LANG="he_IL.UTF-8" KEYTABLE="us" KDEKEYBOARDS="il,us" XKBLAYOUT="il" TZ="Asia/Jerusalem" CD_COUNTRY="Hebrew" ;; hr-utf8|hr) ## Croatian version #LANGUAGE=hr_HR:hr" LANG="hr_HR.UTF-8" KEYTABLE="hr" KDEKEYBOARDS="hr,us" XKBLAYOUT="hr" TZ="Europe/Zagreb" CD_COUNTRY="Croatian" ;; ie-utf8|ie) ## Irish (English) version #LANGUAGE="en_IE:en" LANG="en_IE.UTF-8" KEYTABLE="uk" KDEKEYBOARDS="ie,gb,us" XKBLAYOUT="ie" TZ="Europe/Dublin" CD_COUNTRY="British" ;; it-utf8|it) ## Italian version #LANGUAGE="it_IT" LANG="it_IT.UTF-8" KEYTABLE="it" KDEKEYBOARDS="it,us" XKBLAYOUT="it" TZ="Europe/Rome" CD_COUNTRY="Italian" ;; ja-utf8|ja) ## (limited) Japanese version #LANGUAGE="ja_JP:ja" LANG="ja_JP.UTF-8" KEYTABLE="us" KDEKEYBOARDS="jp,us" XKBLAYOUT="jp" TZ="Asia/Tokyo" CD_COUNTRY="Japanese" ;; nl-utf8|nl) ## Dutch version #LANGUAGE="nl_NL:nl" LANG="nl_NL.UTF-8" KEYTABLE="us" KDEKEYBOARDS="nl,us" XKBLAYOUT="nl" TZ="Europe/Amsterdam" CD_COUNTRY="Dutch" ;; pl-utf8|pl) ## Polish version #LANGUAGE="pl_PL:pl" LANG="pl_PL.UTF-8" KEYTABLE="pl" KDEKEYBOARDS="pl,us" XKBLAYOUT="pl" TZ="Europe/Warsaw" CD_COUNTRY="Polish" ;; pt-utf8|pt) ## Portuguese version #LANGUAGE="pt_PT:pt" LANG="pt_PT.UTF-8" KEYTABLE="pt-latin1" KDEKEYBOARDS="pt,us" XKBLAYOUT="pt" TZ="Europe/Lisbon" CD_COUNTRY="Portugese" ;; ru-utf8|ru) ## Russian version #LANGUAGE="ru_RU:ru" LANG="ru_RU.UTF-8" KEYTABLE="ru" KDEKEYBOARDS="ru,us" XKBLAYOUT="ru" TZ="Europe/Moscow" CD_COUNTRY="Russian" ;; sk-utf8|sk) ## Slovak version (guessed) #LANGUAGE="sk_SK:sk" LANG="sk_SK.UTF-8" KEYTABLE="sk-qwerty" KDEKEYBOARDS="sk,us" XKBLAYOUT="sk" TZ="Europe/Bratislava" CD_COUNTRY="Slovak-qwerty" ;; sl-utf8|sl) ## Slovenian keyboard #LANGUAGE="sl_SI:sl" LANG="sl_SI.UTF-8" KEYTABLE="slovene" KDEKEYBOARDS="si,us" XKBLAYOUT="si" TZ="Europe/Ljubljana" #CONSOLEFONT="iso02g" CD_COUNTRY="Slovene" ;; tr-utf8|tr) ## Turkish version (guessed) #LANGUAGE="tr_TR" LANG="tr_TR.UTF-8" KEYTABLE="tr_q-latin5" KDEKEYBOARDS="tr,us" XKBLAYOUT="tr" TZ="Europe/Istanbul" CD_COUNTRY="Turkish" ;; tw-utf8|tw) ## Traditional Chinese version (thanks to Chung-Yen Chang) #LANGUAGE="zh_TW:zh" LANG="zh_TW.UTF-8" KEYTABLE="us" KDEKEYBOARDS="us" XKBLAYOUT="us" TZ="Asia/Taipei" CD_COUNTRY="" ;; uk-utf8|uk) ## British version UTF-8 #LANGUAGE="en_GB:en" LANG="en_GB.UTF-8" KEYTABLE="uk" KDEKEYBOARDS="gb,us" XKBLAYOUT="gb" TZ="Europe/London" CD_COUNTRY="British" ;; us-utf8|us) # American version UTF-8 #LANGUAGE="en_US:en" LANG="en_US.UTF-8" KEYTABLE="us" KDEKEYBOARDS="us,ca" XKBLAYOUT="us" TZ="America/New_York" CD_COUNTRY="us_american" ;; *) # American version UTF-8 #LANGUAGE="en_US:en" LANG="en_US.UTF-8" KEYTABLE="us" KDEKEYBOARDS="us,ca" XKBLAYOUT="us" TZ="Europe/London" CD_COUNTRY="us_american" ;; esac export LANG ############################################################################### # update locale settings ############################################################################### # ensure that /etc/default/locale is an ordinary file and not a symlink rm -f /etc/default/locale # write locale update-locale "LANG=$LANG" ############################################################################### # Set KDE i18n Keyboard ############################################################################### if grep -q ^KDEKEYBOARDS /etc/default/distro 2>/dev/null; then sed -i -e 's/^FLL_KDEKEYBOARDS=.*$/FLL_KDEKEYBOARDS='"$KDEKEYBOARDS"'/' \ /etc/default/distro else echo "" >> /etc/default/distro echo "# kde i18n settings" >> /etc/default/distro echo "FLL_KDEKEYBOARDS=\"$KDEKEYBOARDS\"" >> /etc/default/distro fi ############################################################################### # for console-data ############################################################################### case $CD_COUNTRY in French) #Issue CD_FAMILY="azerty" CD_KEYMAP="Standard" CD_VARIANT="Same as X11 (latin 9)" CD_FULL="$CD_COUNTRY" ;; Belgian) CD_FAMILY="azerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; us_american) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="US american" ;; British) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Bulgarian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Byelorussian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Brazilian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Canadian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="English" CD_FULL="$CD_COUNTRY" ;; Canadian-fr) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="French" CD_FULL="$CD_COUNTRY" ;; Czech-qwerty) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Danish) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Spanish) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Estonian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Finnish) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Polish) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Greek) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Italian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Lithuanian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Latvian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Norwegian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Japanese) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Dutch) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Hebrew) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Hungarian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Icelandic) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Latin_American) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="Latin American" ;; Macedonian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Portugese) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Romanian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Russian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Serbian-qwerty) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Swedish) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Slovak-qwerty) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Thai) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Turkish) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Ukrainian) CD_FAMILY="qwerty" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Swiss-fr) CD_FAMILY="qwertz" CD_KEYMAP="Standard" CD_VARIANT="French" CD_FULL="$CD_COUNTRY" ;; Swiss-de) CD_FAMILY="qwertz" CD_KEYMAP="Standard" CD_VARIANT="German" CD_FULL="German" ;; German) CD_FAMILY="qwertz" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Slovak-qwertz) CD_FAMILY="qwertz" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Czech-qwertz) CD_FAMILY="qwertz" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Hungarian) CD_FAMILY="qwertz" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Slovene) CD_FAMILY="qwertz" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Croat) CD_FAMILY="qwertz" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; Serbian-qwertz) CD_FAMILY="qwertz" CD_KEYMAP="Standard" CD_VARIANT="Standard" CD_FULL="$CD_COUNTRY" ;; *) CD_FAMILY="qwerty" CD_KEYMAP="us" CD_VARIANT="Standard" CD_FULL="US american" ;; esac CD_LAYOUT="$(echo $CD_COUNTRY | cut -d'-' -f1)" CD_LAYOUT_PATH=$(echo $CD_COUNTRY | tr [A-Z] [a-z] | cut -d'-' -f1) CD_FULL_FIX="$(echo $CD_FULL | cut -d'-' -f1)" CD_VARIANT_PATH="$(echo $CD_VARIANT | tr [A-Z] [a-z])" ############################################################################### # enable splash if possible ############################################################################### SPLASH=$(getbootparam "splash" 2>/dev/null) [ -z "$SPLASH" ] && checkbootparam "splash" && SPLASH=on [ "$SPLASH" = "off" ] && SPLASH="" if [ -n "$SPLASH" ]; then RES=$(fbresolution 2>/dev/null) [ -z "$RES" ] && RES=1024x768 if [ "$RES" = "1024x768" -o "$RES" = "800x600" ] && [ -x /sbin/splashy ]; then [ -p /etc/splashy/splashy.fifo ] || /sbin/splashy boot fi fi ############################################################################### # / must be read-write in any case, starting from here ############################################################################### mount -o remount,rw / 2>/dev/null splash_progress 10 ############################################################################### # begin hardware detection and autoconfiguration ############################################################################### echo " ${GREEN}Enabling ${YELLOW}udev${GREEN} device and hotplug management daemon.${NORMAL}" # No kernel messages while probing modules echo "0" > /proc/sys/kernel/printk # start udev start_service udev S ############################################################################### # usbcore workaround ############################################################################### # check if usbcore is not already loaded and allow some grace time if ! stringinfile "usbcore" /proc/modules; then USBCORE_TIMEOUT="$(getbootparam usbwait 2>/dev/null)" [ -z "$USBCORE_TIMEOUT" ] && USBCORE_TIMEOUT=5 USBCORE_TIMEOUT=$((USBCORE_TIMEOUT)) [ $USBCORE_TIMEOUT -lt 0 -o $USBCORE_TIMEOUT -gt 60 ] && USBCORE_TIMEOUT=5 echo -n "${BLUE}Waiting for ${YELLOW}usbcore${BLUE}. ${NORMAL}" for x in $(seq ${USBCORE_TIMEOUT}); do stringinfile "usbcore" /proc/modules && break echo -n "${BLUE}$((${USBCORE_TIMEOUT}-${x})) s${NORMAL}" for y in $(seq 10); do stringinfile "usbcore" /proc/modules && break sleep 0.1 done for z in $(seq $((${#x}+2))); do echo -ne "\b \b"; done done if stringinfile "usbcore" /proc/modules; then echo "${GREEN}Done.${NORMAL}" else echo "${RED}Timeout reached.${NORMAL}" fi fi # mount special filesystems under /dev start_service mountdevsubfs.sh splash_progress 20 ############################################################################### # setup console-data (before interactive setup stage) ############################################################################### echo -n "${BLUE}Configuring console for a ${YELLOW}${KEYTABLE} keymap${BLUE}...${NORMAL}" # install keymap /usr/sbin/install-keymap "$KEYTABLE" # try this, it takes care of unicode start start_service keymap.sh echo "locales locales/default_environment_locale select $LANG \ console-data console-data/keymap/policy select Select keymap from arch list \ console-data console-data/keymap/family select $CD_FAMILY \ console-data console-data/keymap/$CD_FAMILY/layout select $CD_FULL_FIX \ console-data console-data/keymap/$CD_FAMILY/$CD_LAYOUT_PATH/variant select $CD_VARIANT \ console-data console-data/keymap/$CD_FAMILY/$CD_LAYOUT_PATH/$CD_VARIANT_PATH/keymap select $CD_KEYMAP \ console-data console-data/keymap/full select $CD_FULL" | /usr/bin/debconf-set-selections echo "${BLUE}Done.${NORMAL}" splash_progress 30 ############################################################################### # update mtab ############################################################################### start_service mtab.sh start_service udev-mtab S ############################################################################### # Set clock (Local time is more often used than GMT, so it is default) ############################################################################### if checkbootparam utc >/dev/null 2>&1 || checkbootparam gmt >/dev/null 2>&1; then [ -w /etc/default/rcS ] && sed -i 's/^UTC=.*/UTC=yes/' /etc/default/rcS TZ="UTC" else [ -w /etc/default/rcS ] && sed -i 's/^UTC=.*/UTC=no/' /etc/default/rcS fi if checkbootparam tz >/dev/null 2>&1; then TZ="$(getbootparam tz 2>/dev/null)" fi [ -n "$TZ" ] || TZ="UTC" if [ -f "/usr/share/zoneinfo/$TZ" ]; then # /etc/localtime is excluded at build time cp "/usr/share/zoneinfo/$TZ" /etc/localtime echo "$TZ" > /etc/timezone fi start_service hwclock.sh >/dev/null splash_progress 40 ############################################################################### # hwsetup ############################################################################### # Delete obsolete links and files before starting autoconfig if ! checkbootparam "nohwsetup"; then rm -f "$HWSETUP_MAIN" 2>/dev/null fi # Also read desired desktop, if any DESKTOP="$(getbootparam desktop 2>/dev/null)" # Allow only supported windowmanagers case "$DESKTOP" in gnome|enlightenment|kde|larswm|xfce|xfce4|windowmaker|wmaker|icewm|fluxbox|twm|nx|rdp|kiosk) ;; *) DESKTOP="kde" ;; esac # Desired desktop echo "DESKTOP=\"$DESKTOP\"" > "$HWSETUP_DESKTOP" # override dpi setting CUSTOM_DPI="$(getbootparam dpi 2>/dev/null)" # Write DPI setting if specified [ "$CUSTOM_DPI" ] && echo "CUSTOM_DPI=\"$CUSTOM_DPI\"" >> "$HWSETUP_MAIN" # disable 915resolution hack checkbootparam "no915res" && echo "NO915RES=\"yes\"" >> "$HWSETUP_MAIN" # Second: Search & configure supported hardware # Check for options relevant to hwsetup NOSERIAL="" checkbootparam noserial >/dev/null 2>&1 && NOSERIAL="yes" [ -n "$NOSERIAL" ] && HWSETUP_NOSERIAL="-m" # load serial module modprobe 8250 >/dev/null 2>&1 # load psmouse module modprobe psmouse >/dev/null 2>&1 echo -n "${WHITE}" if hwsetup $HWSETUP_NOSERIAL >/dev/null; then echo -n "${NORMAL}" else echo " ${RED}Please check.${NORMAL}" fi splash_progress 60 # activate PC Speaker modprobe pcspkr >/dev/null 2>&1 # activate input driver for char event devices modprobe evdev >/dev/null 2>&1 # Handle special options for ALSA sound drivers rm -f /etc/modprobe.d/alsa-special SYS=$(cut -f2 -d: /sys/devices/pci*/{,*/}*/modalias 2>/dev/null) ALSA_SPECIAL="" for sysid in $SYS; do # ALSA_SPECIAL is [kernel module with _ not -] [needed options] case "$sysid" in v000010DEd0000026Csv00001043sd000081CBbc*) # ASUS M2NPV-VM ALSA_SPECIAL="snd_hda_intel position_fix=1 model=3stack" break ;; v00008086d000027D8sv00001854sd0000005Fbc*) # LG Electronics P1-J302E1 ALSA_SPECIAL="snd_hda_intel model=lg" break ;; v00008086d0000284Bsv00008086sd0000284Bbc*) # MSI MS-7235 ALSA_SPECIAL="snd_hda_intel position_fix=1" break ;; esac done if [ -n "$ALSA_SPECIAL" ]; then echo options $ALSA_SPECIAL > /etc/modprobe.d/alsa-special if [ -d /sys/module/${ALSA_SPECIAL%% *} ]; then rmmod ${ALSA_SPECIAL%% *} modprobe $ALSA_SPECIAL fi fi # Read in what hwsetup has found [ -f "$HWSETUP_MAIN" ] && . "$HWSETUP_MAIN" # Workaround for new mouse detection if [ -f "$HWSETUP_MOUSE" ]; then . "$HWSETUP_MOUSE" if [ "$MOUSETYPE" = "ps2" ]; then ln -sf /dev/psaux /dev/mouse perl -pi -e "s|/dev/input/mice|/dev/psaux|" "$HWSETUP_MOUSE" "$HWSETUP_MAIN" . "$HWSETUP_MOUSE" . "$HWSETUP_MAIN" fi fi # Mouse if [ -n "$MOUSE_DEVICE" ]; then echo " ${GREEN}Mouse is ${YELLOW}${MOUSE_FULLNAME}${GREEN} at ${MAGENTA}${MOUSE_DEVICE}${NORMAL}" fi # Soundcard if [ -n "$SOUND_FULLNAME" -o -n "$SOUND_DRIVER" ]; then SOUNDCARD="$SOUND_DRIVER" echo -n " ${GREEN}Soundcard is" [ -n "$SOUND_FULLNAME" ] && echo -n " ${YELLOW}$SOUND_FULLNAME${GREEN}" [ -n "$SOUNDCARD" ] && echo -n ", ALSA module is ${MAGENTA}$SOUNDCARD${GREEN}" echo "${NORMAL}" fi # Get max. sound volume VOL="$(getbootparam vol 2>/dev/null)" [ -z "$VOL" ] && VOL=50 VOL=$((VOL)) [ $VOL -lt 0 -o $VOL -gt 100 ] && VOL=50 # Fast ALSA detection if [[ "$SOUND_DRIVER" = snd-* ]]; then echo alias snd-card-0 $SOUND_DRIVER > /etc/modprobe.d/sound echo options $SOUND_DRIVER index=0 >> /etc/modprobe.d/sound #set_mixers aumix -m 0 -v $VOL -w $VOL -c $VOL >/dev/null 2>&1 # set pcm & master & cd to $VOL, micro to 0 fi ############################################################################### # misc. hardware detections/workarounds ############################################################################### # dwl520e1 detection if lspci -nv|grep 1260:3873 -A1|grep -q 1186:3700; then /usr/sbin/dwl520e1_fw_load >/dev/null 2>&1 echo 'install hostap_pci /sbin/modprobe --ignore-install hostap_pci && /usr/sbin/dwl520e1_fw_load >/dev/null 2>&1' > \ /etc/modprobe.d/dwl520e1 fi # ipw3945 detection if [ -e /sys/bus/pci/drivers/ipw3945/*/cmd ]; then start_service ipw3945d >/dev/null fi # soft modem detection if ! checkbootparam "nomodem"; then if lspci | grep Intel | grep -q "AC'97 Modem Controller"; then start_service sl-modem-daemon >/dev/null fi fi # Start FC detection on vt10 NOFC="" if [ -x /usr/sbin/detect-fc ]; then checkbootparam "nofc" && NOFC="yes" [ -e /etc/drdsl/modules.inc ] && NOFC="yes" if [ -z "$NOFC" ]; then echo " ${GREEN}Starting ${YELLOW}FC${GREEN} detection on ${YELLOW}vt10${GREEN}.${NORMAL}" open -c 10 /usr/sbin/detect-fc fi fi ############################################################################### # load required modules ############################################################################### # Load fuse module if [ -x /etc/init.d/fuse-utils ]; then start_service fuse-utils >/dev/null else modprobe fuse >/dev/null 2>&1 fi # load capability LSM (needed for hal) modprobe capability >/dev/null 2>&1 ############################################################################### # Check for blind option or brltty ############################################################################### BLIND="" checkbootparam "blind" && BLIND="yes" BRLTTY="$(getbootparam brltty 2>/dev/null)" if [ -n "$BLIND" -o -n "$BRLTTY" ]; then if [ -x /sbin/brltty ]; then # Blind option detected, start brltty now. CMD=brltty BRLTYPE="" BRLDEV="" BRLTEXT="" if [ -n "$BRLTTY" ]; then # Extra options BRLTYPE="${BRLTTY%%,*}" R="${BRLTTY#*,}" if [ -n "$R" -a "$R" != "$BRLTTY" ]; then BRLTTY="$R" BRLDEV="${BRLTTY%%,*}" R="${BRLTTY#*,}" if [ -n "$R" -a "$R" != "$BRLTTY" ]; then BRLTTY="$R" BRLTEXT="${BRLTTY%%,*}" R="${BRLTTY#*,}" fi fi fi [ -n "$BRLTYPE" ] && CMD="$CMD -b $BRLTYPE" [ -n "$BRLDEV" ] && CMD="$CMD -d $BRLDEV" [ -n "$BRLTEXT" ] && CMD="$CMD -t $BRLTEXT" echo " ${BLUE}Starting braille-display manager: ${GREEN}${CMD}${BLUE}.${NORMAL}" ( exec $CMD & ) sleep 2 fi fi ############################################################################### # INTERACTIVE II ############################################################################### if [ -n "$INTERACTIVE" ]; then # Interactive configuration echo "${BLUE}Entering interactive configuration second stage.${NORMAL}" echo -n "${CYAN}Do you want to (re)configure your soundcard?${NORMAL} [Y/n] " read a [ "$a" != "n" ] && sndconfig && ( exec aumix -m 0 >/dev/null 2>&1 & ) if [ -n "$MOUSE_FULLNAME" -o -n "$MOUSE_DEVICE" ]; then echo -n " ${GREEN}Your mouse has been autodetected as: ${MAGENTA}" ls -l /dev/mouse | awk '{print $9 " " $10 " " $11}' echo -n "${NORMAL}" fi echo -n "${CYAN}Do you want to (re)configure your mouse?${NORMAL} [Y/n] " read a [ -f "$HWSETUP_MOUSE" ] && . "$HWSETUP_MOUSE" [ "$a" != "n" ] && mouseconfig fi splash_progress 80 ############################################################################### # automatic X Setup ############################################################################### if ! checkbootparam "nomkxf86config"; then [ -x /usr/sbin/mkxf86config ] && /usr/sbin/mkxf86config fi # Read in changes [ -f "$HWSETUP_MAIN" ] && . "$HWSETUP_MAIN" ############################################################################### # INTERACTIVE III ############################################################################### if [ -n "$INTERACTIVE" ]; then echo -n "${CYAN}Do you want to (re)configure your graphics (X11) subsystem?${NORMAL} [Y/n] " read a [ "$a" != "n" ] && xf86cfg -textmode -xf86config "$X_CONF" >/dev/console 2>&1 /dev/null 2>&1 # Export ALSA_CARD cariable to init script case "$ALSA_CARD" in auto*) ALSA_CARD="" ;; esac ALSA_CARD="$ALSA_CARD" /etc/init.d/alsa-autoconfig # Something went wrong ? [ ! -r /etc/modules.conf ] && ln -sf ${FLL_MOUNTPOINT}/etc/modules.conf /etc/modules.conf fi RUNLEVEL="$(runlevel)" # Apply Language Settings for xorg and KDE sed -i "s|\"XkbLayout\".*$|\"XkbLayout\"\t\"${XKBLAYOUT}\"|" /etc/X11/xorg.conf >/dev/null 2>&1 sed -i "s|^LayoutList.*$|LayoutList=${KDEKEYBOARDS}|" /etc/skel/.kde/share/config/kxkbrc >/dev/null 2>&1 ############################################################################### # partition detection and autoconfiguration ############################################################################### # Add cdrom devices to /etc/fstab for c in $(ls -d /dev/cdrom* 2>/dev/null); do m=${c#/dev} [ "$m" = "/cdrom" ] && m="/cdrom0" [ -d /media$m ] || mkdir -p /media$m #stringinfile "$c" "/etc/fstab" || printf "%-15s %-15s %-7s %-15s %-7s %s\n" "$c" "/media$m" "udf,iso9660" "user,noauto" "0" "0" >> /etc/fstab stringinfile "/dev/$(readlink $c)" "/etc/fstab" || printf "%-15s %-15s %-7s %-15s %-7s %s\n" "/dev/$(readlink $c)" "/media$m" "udf,iso9660" "user,noauto" "0" "0" >> /etc/fstab done # Add floppy devices to /etc/fstab for f in $(ls -d /sys/block/fd* 2>/dev/null); do [ -d /media/floppy${f#/sys/block/fd} ] || mkdir -p /media/floppy${f#/sys/block/fd} stringinfile "$f" "/etc/fstab" || printf "%-15s %-15s %-7s %-15s %-7s %s\n" "/dev${f#/sys/block}" "/media/floppy${f#/sys/block/fd}" "auto" "rw,user,noauto" "0" "0" >> /etc/fstab done NOSWAP="" checkbootparam "noswap" && NOSWAP="yes" # Collect partitions from /proc/partitions partitions="" while read major minor blocks partition relax; do partition="${partition##*/}" [ -z "$partition" -o ! -e "/dev/$partition" ] && continue case "$partition" in hd?) # IDE Harddisk, entire disk ;; sd?) # SCSI Harddisk, entire disk ;; [hs]d*) # IDE or SCSI disk partition partitions="$partitions /dev/$partition" ;; esac done </dev/null && echo hd[a-z]); do if test -d /proc/ide/$d; then if egrep -q 'using_dma[ \t]+1' /proc/ide/$d/settings 2>/dev/null; then MODEL="$(cat /proc/ide/$d/model 2>/dev/null)" test -z "$MODEL" && MODEL="[GENERIC IDE DEVICE]" echo "${BLUE}Disabling DMA acceleration for: ${MAGENTA}$d ${YELLOW}[${MODEL}]${NORMAL}" echo "using_dma:0" >/proc/ide/$d/settings fi fi done fi ############################################################################### # create fstab and populate /media ############################################################################### # Start creating /etc/fstab with HD partitions and USB SCSI devices now if checkbootparam "nofstab"; then echo " ${BLUE}Skipping /etc/fstab creation as requested on boot commandline.${NORMAL}" else echo -n "${BLUE}Scanning for Harddisk partitions and creating ${YELLOW}/etc/fstab${BLUE}..." [ -d /${FLL_MOUNTPOINT} ] && rebuildfstab -r -u ${FLL_LIVE_USER} -g $(getent passwd "$FLL_LIVE_USER" | cut -d\: -f 4) >/dev/null 2>/dev/null || rebuildfstab -r >/dev/null 2>&1 if [ -e /var/run/rebuildfstab.pid ]; then # Another instance of rebuildfstab, probably from hotplug, is still running, so just wait. sleep 8 fi echo "${BLUE}Done.${NORMAL}" fi if [ -n "$partitions" ]; then while read p m f relax; do case "$p" in *fd0*|*proc*|*pts*|*sys*|*cdrom*|\#*) continue ;; esac options="users,exec" fnew="" case "$f" in swap) if [ -n "$NOSWAP" ]; then echo "${BLUE}Ignoring swap partition ${MAGENTA}$p${BLUE} as requested.${NORMAL}" else echo "${BLUE}Using swap partition ${MAGENTA}$p${BLUE}.${NORMAL}" swapon $p 2>/dev/null fi continue ;; esac # Create mountdir if not already present d="/media/${p##*/}" ; [ -d "$d" ] || mkdir -p "$d" case "$f" in vfat|msdos) if [ -z "$NOSWAP" ] && mount -o uid=${FLL_LIVE_USER},gid=$(getent passwd "$FLL_LIVE_USER" | cut -d\: -f 4),ro -t $f $p $d 2>/dev/null; then if [ -f $d/${FLL_DISTRO_NAME}.swp ]; then mount -o remount,rw $d if swapon $d/${FLL_DISTRO_NAME}.swp 2>/dev/null; then echo "${BLUE}Using ${FLL_DISTRO_NAME} swapfile ${MAGENTA}$d/${FLL_DISTRO_NAME}.swp${BLUE}.${NORMAL}" mount -o remount,ro $d 2>/dev/null fnew="$d/${FLL_DISTRO_NAME}.swp none swap sw 0 0" stringinfile "$fnew" "/etc/fstab" || echo "$fnew" >> /etc/fstab else umount $d fi else umount $d fi fi ;; esac done </dev/console 2>&1 /usr/sbin/mkdosswapfile /dev/console 2>&1 fi ############################################################################### # Fat-Client-Version: DHCP Broadcast for IP address ############################################################################### if checkbootparam "nodhcp"; then echo " ${BLUE}Skipping DHCP broadcast/network detection as requested on boot commandline.${NORMAL}" else NETDEVICES=$(perl -le 'print for map {s/.*\///; grep( !/^(lo|br|sit)\d*/,$_);} ') if [ -n "$NETDEVICES" ]; then CONNETDEVS="" for DEVICE in $NETDEVICES; do # wireless [ -d /sys/class/net/${DEVICE}/wireless ] && continue if [ -f /sys/class/net/${DEVICE}/addr_len ]; then # unwanted: > 6 byte mac length (eg, placeholder interface, eth1394) [ "$(< /sys/class/net/${DEVICE}/addr_len)" -gt 6 ] && continue fi if ifconfig "$DEVICE" up; then sleep 2 # probe for link beat ifplugstatus --quiet "$DEVICE" # link beat detected ? if [ "$?" = "2" ]; then CONNETDEVS="$CONNETDEVS $DEVICE" echo "" >> /etc/network/interfaces echo "allow-hotplug $DEVICE" >> /etc/network/interfaces echo "iface $DEVICE inet dhcp" >> /etc/network/interfaces else ifconfig "$DEVICE" down fi fi done if [ -n "$CONNETDEVS" ]; then echo -n " ${GREEN}Starting ${YELLOW}DHCP${GREEN} broadcast on ethernet devices:${NORMAL}" echo "${MAGENTA}${CONNETDEVS}${GREEN}.${NORMAL}" fi start_service ifupdown >/dev/null # networking also starts the lo (loopback) interface, background it ( start_service networking >/dev/null 2>&1 ) & fi fi ############################################################################### # desktop wallpaper (why is this here?) ############################################################################### if [ -r "${FLL_WALLPAPER}" ]; then # Set $BACKGROUND according to distro defaults BACKGROUND="${FLL_WALLPAPER}" else # Search for custom background image for KDE/GNOME/X for i in /cdrom/${FLL_IMAGE_DIR}/background /usr/share/wallpapers/sidux; do for j in png jpg gif; do BACKGROUND="$i.$j" [ -e "$BACKGROUND" ] && break 2 done done fi echo 'BACKGROUND="'"$BACKGROUND"'"' >> "$HWSETUP_MAIN" ############################################################################### # utility functions for perstent config/home handling below ############################################################################### # checks a location for a file case insensitve (e.g. checkifile /mnt foo.sh) checkifile() { CHECKIFILE=$(find $1 -nowarn -maxdepth 1 -type f -iname "$2" 2>/dev/null) [ -z "$CHECKIFILE" ] && return 1 return 0 } findfile() { FOUND="" # search all partitions for a file in the root directory for i in /media/[sh]d[a-z] /media/[sh]d[a-z][1-9] /media/[sh]d[a-z][1-9]?*; do # See if it's already mounted checkifile $i $1 && { echo "$i/$1"; return 0; } if [ -d "$i" ] && mount -r "$i" 2>/dev/null; then checkifile $i $1 && FOUND="$i/$1" umount -l "$i" 2>/dev/null [ -n "$FOUND" ] && { echo "$FOUND"; return 0; } fi done return 2 } # Load aes and cryptoloop modprobe aes 2>/dev/null modprobe cryptoloop 2>/dev/null # Try to mount this filesystem read-only, without or with encryption trymount() { # Check if already mounted case "$(cat /proc/mounts)" in *\ $2\ *) return 0 ;; esac # Apparently, mount-aes DOES autodetect AES loopback files. [ -b "$1" ] && { mount -t auto -o ro "$1" "$2" 2>/dev/null; RC="$?"; } # We need to mount crypto-loop files with initial rw support [ -f "$1" ] && { mount -t auto -o loop,rw "$1" "$2" 2>/dev/null; RC="$?"; } # Mount succeeded? [ "$RC" = "0" ] && return 0 echo "" echo "${CYAN}Filesystem not autodetected, trying to mount $1 with AES256 encryption${NORMAL}" a="y" while [ "$a" != "n" -a "$a" != "N" ]; do # We need to mount crypto-loop files with initial rw support mount -t auto -o loop,rw,encryption=AES256 "$1" "$2" && return 0 echo -n "${RED}Mount failed, retry? [Y/n] ${NORMAL}" read a done return 1 } # Unionfs getfiledev() { filedev="$(echo $MYPARAM | grep ^/media/ | tail -n 1 | sed s/\\/media\\/\\\([^\\/]\\+\\\).*/\\/dev\\/\\\1/)" [ -z "$filedev" ] && filedev="$(echo $MYPARAM | grep ^/dev/ | tail -n 1 | sed s/\\/dev\\/\\\([^\\/]\\+\\\).*/\\/dev\\/\\\1/)" } getfilepath() { filepath="$(echo $MYPARAM | grep ^/media/ | sed s/\\/media\\/\\\([^\\/]\\+\\\)\\///)" [ -z "$filepath" ] && filepath="$(echo $MYPARAM | grep ^/dev/ | sed s/\\/dev\\/\\\([^\\/]\\+\\\)\\///)" } ############################################################################### # cdrom config script ############################################################################### # Move up with other cheats code later checkbootparam noconfigall && NOCONFIGCD="Y" && NOCONFIGHOME="Y" && NOCONFIGCHEAT="Y" checkbootparam noconfigcd && NOCONFIGCD="Y" checkbootparam noconfighome && NOCONFIGHOME="Y" checkbootparam noconfigcheat && NOCONFIGCHEAT="Y" if [ -z "$NOCONFIGCD" ]; then # Check for extra shellscript on CD-Rom (/cdrom/${FLL_IMAGE_DIR}/${FLL_DISTRO_NAME}.sh) MYCONFIG="$(checkifile /cdrom/${FLL_IMAGE_DIR}/ "${FLL_DISTRO_NAME}.sh")" if [ -n "$MYCONFIG" -a -f "/cdrom/${FLL_IMAGE_DIR}/$MYCONFIG" -a -z "$NOCONFIGCD" ]; then echo "" echo " ${GREEN}${FLL_DISTRO_NAME} Configuration file found on CD, executing ${MAGENTA}$MYCONFIG${GREEN}.${NORMAL}" echo "6" > /proc/sys/kernel/printk . /cdrom/${FLL_IMAGE_DIR}/${MYCONFIG} || true echo "0" > /proc/sys/kernel/printk fi fi ############################################################################### # persistent /home ############################################################################### # Check for persistent homedir option and eventually mount /home from there, # or use a loopback file. HOMEDIR="$(getbootparam home)" MYHOMEDEVICE="" MYHOMEMOUNTPOINT="" MYHOMEDIR="" if [ -n "$HOMEDIR" ]; then case "$HOMEDIR" in /dev/*) MYHOMEDEVICE="${HOMEDIR##/dev/}" MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}" MYHOMEMOUNTPOINT=$(grep $MYHOMEDEVICE /proc/mounts | cut -d' ' -f2) [ -z "$MYHOMEMOUNTPOINT" ] && MYHOMEMOUNTPOINT="/media/${MYHOMEDEVICE##/dev/}" MYHOMEDIR="/media/${HOMEDIR##/dev/}" ;; /media/*) MYHOMEDEVICE="${HOMEDIR##/media/}" MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}" MYHOMEMOUNTPOINT=$(grep $MYHOMEDEVICE /proc/mounts | cut -d' ' -f2) [ -z "$MYHOMEMOUNTPOINT" ] && MYHOMEMOUNTPOINT="/media/${MYHOMEDEVICE##/dev/}" MYHOMEDIR="$HOMEDIR" ;; [Aa][Uu][Tt][Oo]|[Ss][Cc][Aa][Nn]|[Ff][Ii][Nn][Dd]) MYHOMEDIR="$(findfile $FLL_PERSISTENT_HOME)" MYHOMEDEVICE="${MYHOMEDIR##/media/}" MYHOMEDEVICE="/dev/${MYHOMEDEVICE%%/*}" MYHOMEMOUNTPOINT=$(grep $MYHOMEDEVICE /proc/mounts | cut -d' ' -f2) [ -z "$MYHOMEMOUNTPOINT" ] && MYHOMEMOUNTPOINT="/media/${MYHOMEDEVICE##/dev/}" ;; *) echo "${CRE}${RED}Invalid ${CYAN}home=${RED} option '$HOMEDIR' specified (must start with /dev/ or /media/ or 'scan').${NORMAL}" echo "${CRE}${RED}Option ignored.${NORMAL}" ;; esac fi if [ -n "$MYHOMEDIR" ]; then if trymount "$MYHOMEDEVICE" "$MYHOMEMOUNTPOINT"; then MYHOMEFILE=$(checkifile $MYHOMEMOUNTPOINT/ $FLL_PERSISTENT_HOME) && MYHOMEDIR="$MYHOMEFILE" while read device mountpoint fs relax; do case "$mountpoint" in *$MYHOMEMOUNTPOINT*) case "$fs" in *[Nn][Tt][Ff][Ss]*) umount "$MYHOMEMOUNTPOINT"; echo " ${RED}ERROR: WON'T MOUNT NTFS FILESYSTEM ON $MYHOMEDEVICE READ/WRITE!" break ;; *[Ff][Aa][Tt]*) # Note: This currently won't work with encrypted partitions mount -o remount,rw,uid=${FLL_LIVE_USER},gid=$(getent passwd "$FLL_LIVE_USER" | cut -d\: -f 4),umask=002,shortname=mixed,quiet "$MYHOMEDEVICE" "$MYHOMEMOUNTPOINT" if [ ! -f "$MYHOMEDIR" ]; then echo " ${RED}WARNING: FAT32 is not a good filesystem option for /home/${FLL_LIVE_USER} (missing socket/symlink support).${NORMAL}" echo " ${RED}WARNING: Better use an ext2 loopback file on this device, and boot with home=$MYHOMEDEVICE/$FLL_PERSISTENT_HOME.${NORMAL}" fi ;; esac if mount -o remount,rw "$MYHOMEMOUNTPOINT"; then echo -n " ${GREEN}Mounting ${YELLOW}$MYHOMEDIR${GREEN} as ${YELLOW}/home/${FLL_LIVE_USER}${GREEN}... " if [ -f "$MYHOMEDIR" ]; then # It's a loopback file, mount it over the /home/${FLL_LIVE_USER} directory trymount "$MYHOMEDIR" /home/${FLL_LIVE_USER} RC="$?" [ "$RC" = "0" ] && ERROR="$(mount -o remount,rw /home/${FLL_LIVE_USER} 2>&1)" RC="$?" else # Do a --bind mount ERROR="$(mount --bind "$MYHOMEDIR" /home/${FLL_LIVE_USER} 2>&1)" RC="$?" fi [ "$RC" = "0" ] && echo "${GREEN}/home/${FLL_LIVE_USER} mounted OK.${NORMAL}" || { echo "${RED}FAILED."; echo "$ERROR${NORMAL}"; } fi break ;; esac done < /proc/sys/kernel/printk . "$MYCONFIG" "$MYCONFDIR" || true echo "0" > /proc/sys/kernel/printk fi umount "$MYCONFMOUNTPOINT" 2>/dev/null fi fi [ -n "$FOUND_CONFIG" ] || echo " ${BLUE}Not present.${NORMAL}" fi fi # ${FLL_DISTRO_NAME}.sh if [ -z "$NOCONFIGHOME" ]; then MYCONFIG="$(checkifile /home/${FLL_LIVE_USER}/ .${FLL_DISTRO_NAME}.sh)" if [ -n "$MYCONFIG" ]; then echo " ${GREEN}Found, now executing ${MAGENTA}$MYCONFIG${GREEN}.${NORMAL}" echo "6" > /proc/sys/kernel/printk . "$MYCONFIG" "/home/${FLL_LIVE_USER}" || true echo "0" > /proc/sys/kernel/printk fi fi ############################################################################### # power management ############################################################################### PBIOS= PSERV= if [ -d /proc/acpi ]; then # ACPI if checkbootparam "noacpi"; then echo " ${BLUE}Skipping ACPI bios detection as requested on boot commandline.${NORMAL}" else fuser -k /proc/acpi/event >/dev/null 2>&1 PBIOS=ACPI PSERV=acpid fi else # APM if checkbootparam "noapm"; then echo " ${BLUE}Skipping APM bios detection as requested on boot commandline.${NORMAL}" else PBIOS=APM PSERV=apmd fi fi if [ -n "$PBIOS" ] && [ -x /etc/init.d/"$PSERV" ]; then echo -n " ${GREEN}${PBIOS} bios found, activating power management:${NORMAL}" if start_service "$PSERV" >/dev/null; then echo " ${MAGENTA}${PSERV}${GREEN}.${NORMAL}" else echo " ${RED}Failed!${NORMAL}" fi fi ############################################################################### # enable dbus & hald ############################################################################### if [ -x /etc/init.d/dbus ]; then if checkbootparam "nodbus"; then echo " ${BLUE}Not starting D-Bus/HAL as requested on boot commandline.${NORMAL}" else echo -n " ${GREEN}Enabling D-Bus and Hardware Abstraction Layer:${NORMAL}" if start_service dbus >/dev/null; then echo " ${MAGENTA}dbus${GREEN}.${NORMAL}" start_service /etc/init.d/avahi-daemon >/dev/null else echo " ${RED}Failed!${NORMAL}" fi fi fi ############################################################################### # laptop? ############################################################################### IS_LAPTOP= if laptop-detect 2>/dev/null; then IS_LAPTOP=true fi ############################################################################### # cpufreq detection ############################################################################### if checkbootparam "nocpufreq"; then echo " ${BLUE}Skipping CPUfreq detection as requested on boot commandline.${NORMAL}" else CPUFREQ= CPUSERV= # cpufreq detection from ubuntu powernowd, exports `CPUFREQ' on successful detection if [ -f /usr/share/initscripts-sidux-live/cpufreq-detect ]; then . /usr/share/initscripts-sidux-live/cpufreq-detect # attempt load the detected cpufreq module if [ -n "$CPUFREQ" ]; then if modprobe "$CPUFREQ" 2>/dev/null; then # start cpufreq power services : else unset CPUFREQ fi fi # if this is a laptop, fallback to acpi-cpufreq if [ -z "$CPUFREQ" ] && [ -n "$IS_LAPTOP" ]; then if modprobe acpi-cpufreq 2>/dev/null; then CPUFREQ=acpi-cpufreq fi fi fi # start power management service if [ -n "$CPUFREQ" ]; then echo -n " ${GREEN}Activating ${YELLOW}${CPUFREQ}${GREEN} CPUfreq management:${NORMAL}" # hack to disable suspend, it currently does not mix with live-mode # kpowersave exposes this problem to unsuspecting users if [ -w /etc/powersave/sleep ]; then sed -i 's/^\(DISABLE_USER_SUSPEND2.*\)=.*$/\1="yes"/' /etc/powersave/sleep fi # preseed powersaved with the correct cpufreq module name (avoid re-detection) if [ -w /etc/powersave/cpufreq ]; then sed -i 's/^\(CPUFREQD_MODULE\)=.*$/\1="'"$CPUFREQ"'"/' /etc/powersave/cpufreq fi # start power management, powersaved is given preference if start_service powersaved >/dev/null; then CPUSERV=powersaved elif start_service powernowd >/dev/null; then CPUSERV=powernowd else echo " ${RED}Failed!${NORMAL}" fi # announce the service if [ -n "$CPUSERV" ]; then echo " ${MAGENTA}${CPUSERV}${GREEN}.${NORMAL}" fi fi fi ############################################################################### # bluetooth ############################################################################### if [ -x /etc/init.d/bluetooth ]; then if checkbootparam "nobluetooth"; then echo " ${BLUE}Skipping bluetooth detection as requested on boot commandline.${NORMAL}" else BLUETOOTH="$(hwinfo --bluetooth | awk '/Hardware Class:/{ print $NF; exit }' 2>/dev/null)" if [ "$BLUETOOTH" = bluetooth ] && start_service bluetooth >/dev/null 2>&1; then echo " ${GREEN}Starting services for ${YELLOW}bluetooth${GREEN} support.${NORMAL}" fi fi fi ############################################################################### # keyboard keycodes ############################################################################### # MS MM keyboard add-on # XXX: are these needed? does hotkey-setup take care of them? setkeycodes e001 126 >/dev/null 2>&1 setkeycodes e059 127 >/dev/null 2>&1 # fn keys setkeycodes e03b 59 >/dev/null 2>&1 setkeycodes e008 60 >/dev/null 2>&1 setkeycodes e007 61 >/dev/null 2>&1 setkeycodes e03e 62 >/dev/null 2>&1 setkeycodes e03f 63 >/dev/null 2>&1 setkeycodes e040 64 >/dev/null 2>&1 setkeycodes e041 65 >/dev/null 2>&1 setkeycodes e042 66 >/dev/null 2>&1 setkeycodes e043 67 >/dev/null 2>&1 setkeycodes e023 68 >/dev/null 2>&1 setkeycodes e057 87 >/dev/null 2>&1 setkeycodes e058 88 >/dev/null 2>&1 # enable hotkeys start_service hotkey-setup >/dev/null 2>&1 ############################################################################### # do laptop specific stuff ############################################################################### if [ -n "$IS_LAPTOP" ]; then # acpi-support if pidof acpid >/dev/null && start_service acpi-support >/dev/null 2>&1; then echo " ${GREEN}Starting ${YELLOW}acpi-support${GREEN} subsystem.${NORMAL}" fi # always start kpowersave if grep -q ^KDE_SERVICES_LAPTOP /etc/default/kde-services-sidux 2>/dev/null; then # kde-services-sidux should start anything useful for a laptop sed -i 's/^KDE_SERVICES_LAPTOP=.*/KDE_SERVICES_LAPTOP="true"/' \ /etc/default/kde-services-sidux else echo "KDE_SERVICES_LAPTOP=\"true\"" >> /etc/default/kde-services-sidux fi fi splash_progress 100 if checkbootparam "splash"; then sleep 1 [ -p /etc/splashy/splashy.fifo ] && (echo exit > /etc/splashy/splashy.fifo) & rm -f /etc/splashy/splashy.fifo sleep 1 fi echo "6" > /proc/sys/kernel/printk # Re-enable signals trap 2 3 11 exit 0