Section "ServerLayout"
	Identifier	"XFree86 Configured"
	Screen		0	"Screen0"	0	0
	InputDevice	"Keyboard0"		"CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
	InputDevice	"USB Mouse"		"CorePointer"
# ALPS TouchPad not detected
# Synaptics TouchPad not detected
EndSection

Section "ServerFlags"
	Option		"AllowMouseOpenFail"	"true"
	
EndSection

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load		"ddc"		# ddc probing of monitor
	#Load		"GLcore"
	Load		"dbe"
#	Load  "dri"
	Load		"extmod"
	Load  "glx"
	Load		"bitmap"	# bitmap-fonts
	Load		"type1"
	Load		"freetype"
	Load		"record"
# TouchPad not detected
EndSection

Section "InputDevice"
	Identifier	"Keyboard0"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"		"xorg"
	Option		"XkbOptions"		"altwin:super_win"
	Option		"XkbModel"		"pc105"
	Option		"XkbLayout"		"de"
	Option		"XkbVariant"		"nodeadkeys"
EndSection

Section "InputDevice"
	Identifier	"Serial Mouse"
	Driver		"mouse"
	Option		"Protocol"		"Microsoft"
	Option		"Device"		"/dev/ttyS0"
	Option		"Emulate3Buttons"	"true"
	Option		"Emulate3Timeout"	"70"
	Option		"SendCoreEvents"	"true"
EndSection

Section "InputDevice"
	Identifier	"PS/2 Mouse"
	Driver		"mouse"
	Option		"Protocol"		"IMPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Device"		"/dev/psaux"
	Option		"Emulate3Buttons"	"true"
	Option		"Emulate3Timeout"	"70"
	Option		"SendCoreEvents"	"true"
EndSection

Section "InputDevice"
	Identifier	"USB Mouse"
	Driver		"mouse"
	Option		"Device"		"/dev/input/mice"
	Option		"SendCoreEvents"	"true"
	Option		"Protocol"		"IMPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Buttons"		"5"
EndSection

Section "InputDevice"
	Identifier	"ALPS TouchPad"
	Driver		"synaptics"
	Option		"Device"	"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"LeftEdge"		"120"
	Option		"RightEdge"		"830"
	Option		"TopEdge"		"120"
	Option		"BottomEdge"		"650"
	Option		"FingerLow"		"14"
	Option		"FingerHigh"		"15"
	Option		"MaxTapTime"		"180"
	Option		"MaxTapMove"		"110"
	Option		"EmulateMidButtonTime"	"75"
	Option		"VertScrollDelta"	"20"
	Option		"HorizScrollDelta"	"20"
	Option		"MinSpeed"		"0.7"
	Option		"MaxSpeed"		"3"
	Option		"AccelFactor"		"0.025"
	Option		"EdgeMotionMinSpeed"	"15"
	Option		"EdgeMotionMaxSpeed"	"15"
	Option		"UpDownScrolling"	"1"
	Option		"CircularScrolling"	"1"
	Option		"CircScrollDelta"	"0.1"
	Option		"CircScrollTrigger"	"2"
EndSection

Section "InputDevice"
	Identifier	"Synaptics TouchPad"
	Driver		"synaptics"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"LeftEdge"		"1700"
	Option		"RightEdge"		"5300"
	Option		"TopEdge"		"1700"
	Option		"BottomEdge"		"4200"
	Option		"FingerLow"		"25"
	Option		"FingerHigh"		"30"
	Option		"MaxTapTime"		"180"
	Option		"MaxTapMove"		"220"
	Option		"VertScrollDelta"	"100"
	Option		"MinSpeed"		"0.06"
	Option		"MaxSpeed"		"0.12"
	Option		"AccelFactor"		"0.0010"
	Option		"SHMConfig"		"on"
	Option		"Repeater"		"/dev/ps2mouse"
EndSection

# Auto-generated by KANOTIX mkxf86config

Section "Monitor"
	Identifier	"Monitor0"
	Option	"DPMS"	"true"
#	HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
	HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
#	VertRefresh  50.0 - 75.0 # Very conservative. May flicker.
	VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
	# 848x480 @ 60.00 Hz (GTF) hsync: 29.82 kHz; pclk: 31.49 MHz
	ModeLine "848x480"  31.49  848 864 952 1056  480 481 484 497  -HSync +Vsync
EndSection

Section "Device"
	### Available Driver options are:-
	# sw_cursor is needed for some ati and radeon cards
	#Option		"sw_cursor"
	#Option		"hw_cursor"
	#Option		"NoAccel"
	#Option		"ShowCache"
	#Option		"ShadowFB"
	#Option		"UseFBDev"
	#Option		"Rotate"
	# more speed for beryl/compiz
	Option		"XAANoOffscreenPixmaps"	"1"
	Identifier	"Card0"
	# The following line is auto-generated by KANOTIX mkxf86config
	Driver      "nvidia"
	Option      "RenderAccel"	"1"
	Option      "AllowGLXWithComposite"	"1"
	Option      "RandRRotation"	"1"
	Option      "AddARGBGLXVisuals"	"1"
	Option      "DisableGLXRootClipping"	"1"
	Option      "TripleBuffer"	"1"
	Option      "UseEDID"	"1"
	Option      "UseEdidFreqs"	"1"
	Option      "DynamicTwinView"	"0"
	Option      "ModeValidation"	"NoDFPNativeResolutionCheck"
	Option      "IgnoreDisplayDevices"	"TV"
	Option      "NoLogo" "1"
	Option      "Coolbits"	"1"
	VendorName	"All"
	BoardName	"All"
	#BusID		"PCI:1:0:0"
EndSection

Section "Screen"
	Identifier	"Screen0"
	Device		"Card0"
	Monitor		"Monitor0"
	DefaultColorDepth 24
	SubSection "Display"
		Depth	8
		Modes "848x480"
	EndSubSection
	SubSection "Display"
		Depth	16
		Modes "848x480"
	EndSubSection
	SubSection "Display"
		Depth	24
		Modes "848x480"
	EndSubSection
EndSection

Section "DRI"
	Mode	0666
EndSection

Section "Extensions"
	Option	"Composite"	"1"
#	Option	"RENDER"	"1"
EndSection